Jump to content
neotko

UMO+ Bed scrachy sound up/down

Recommended Posts

Posted · UMO+ Bed scrachy sound up/down

Hi,

I'm assembling my umo+ kit. And after assembling the bed it does a sound up and down like a 'scratchy' sound, sandy, don't know how to describe it. It's greased as the manual says. I though was that after aligning the linear z it was going to go but it doesn't. I have not assembly the head/board yet since I wanted to do that last.

Here's the video this morning before screwing the z linear bearings. (greased)

 

Here's the video a few minutes ago (applied more grease).

 

It's this normal? My other umo+ goes up and down smothly (that other I bough preassembled).

The sound seems to come from the z rod.

Share this post


Link to post
Share on other sites
Posted · UMO+ Bed scrachy sound up/down

Took the z screw off and the noise comes from the big linear bearings. Unscrew the x8 ones and did align all again. The sound it's there. There's friction going down. The bearings release some kind of oil naturally and I read somewhere that z shafts don't need oil. What could I do?

Share this post


Link to post
Share on other sites
Posted · UMO+ Bed scrachy sound up/down

Yup I have this noise too, always had it. As you say its the linear bearings. It causes a little extra friction on mine too.No idea what causes it, but it doesn't seem to affect the operation.

  • Like 1

Share this post


Link to post
Share on other sites
Posted · UMO+ Bed scrachy sound up/down

Thanks macua. I was assembling the second bed and does that too. Much less but it does. Must be something without importance. Thanks!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Survey: Understanding your workflow
      Interact with future concepts and aim to collect your feedback and opinion. In particular, if this would/could be a welcome addition to your 3D printing workflow. Interested?
      • 0 replies
    • Coronavirus: Let's do our part
      Through this post I would like to further explain what we are doing, and what you could be doing. 
      Our efforts consist of 2 layers. First; connect medical institutions and hospitals to (local) 3D Printing hubs to help them print parts of which a 3D model already exists. And second, contribute to design the necessary part and then have it printed via a (local) 3D printing hub. Experts are available from within Ultimaker and from within our network of 3D printing experts.
        • Like
      • 52 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!