Jump to content
Ultimaker Community of 3D Printing Experts

Heated Chamber Error


Recommended Posts

Posted · Heated Chamber Error

Hi everyone,

Here is the issue.

20150830_022724.thumb.jpg.4e3576ea81d96dee92b2e563dbb82fd7.jpg

I build an Heated Chamber / sound isolated box for my Ultimaker Original +.

After 5 hours of printing. My printed object became a mess.

The chamber becomes actually pretty warm and i do not know what to do about it because i am a noob.

Has someone any suggestions??

Should I close the heated bed or add extra van? Do i need to tweak the settings or is it because of my bad bed-leveling build platform. I want to keep the Ultimaker in the heated chamber.

Here are the settings that i use for printing.

Untitled-2.thumb.png.c6a3bfa70cb3ffb752e53db67194fd82.png

20150830_022724.thumb.jpg.4e3576ea81d96dee92b2e563dbb82fd7.jpg

Untitled-2.thumb.png.c6a3bfa70cb3ffb752e53db67194fd82.png

  • Link to post
    Share on other sites
    • 3 weeks later...
    Posted (edited) · Heated Chamber Error

    Im no pro so ill just chime in having the same model as you.

    I use a brim with PLA and is has always seemed to help with bed adhesion. If I remember correctly PLA is not a big fan of heat chambers and that might be something more for ABS. In either case it would be a good idea to make sure the chamber is regulated evenly. You may not need a fan just simply a vent so the heated air will not continue to stack on itself and make the camber hotter than you need.

    If I where you I would try another print then take some ambient temperature readings with thermometer.  Something that can reach over 100c would be a good idea. Then adjust your vent to get a good level temperature. Im guessing anything above 60c will not work well for PLA but maybe one of the Pro's can chime in on this.

    Edited by Guest
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 6 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
        • 0 replies
    ×
    ×
    • Create New...