Jump to content
thixio1

Strange shifting problem with prints on UMO+

Recommended Posts

Posted (edited) · Strange shifting problem with prints on UMO+

IMG_2935.thumb.JPG.2e08210acb6b5078e88999a16dac30a3.JPG

IMG_2934.thumb.JPG.edb19e7e8328dc018ded66d520008278.JPG

Strange shiftig occurs after a certain height of the prints. Observe the flawless printing for the small brain, while the large brain suffers from artefacts starting from a certain height. Also, the belt of the motor on the back left gets loose every time, although I straightened it by pushing down the motor and fixing it by tightening its screws like hell.

Any ideas or suggestions would be highly appreciated!

Marc

IMG_2935.thumb.JPG.2e08210acb6b5078e88999a16dac30a3.JPG

IMG_2934.thumb.JPG.edb19e7e8328dc018ded66d520008278.JPG

Edited by Guest

Share this post


Link to post
Share on other sites
Posted · Strange shifting problem with prints on UMO+

Umo+ in theory (unless if it's summer in spain) stepper motor chips can't get hot enough. Try to check the calibration. Adjust the pulleys and check the small belt tension. I can print very fast with aceleration at 2000-2500 and travel moves of 200. Of. I changed my belts/pulleys to gt2 but I been using that speeds with the mxl stock without problems.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 96 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!