Jump to content
Labern

Time For Something New

Recommended Posts

Posted · Time For Something New

So it is coming up to 1 year since the UM0+ was released at NYC maker faire and its about 2 years since the UM2 come into the scene.

So will this years Maker Faire see something new?? Or was the extended and 2go released to keep us off there trail for a bit longer?

Its only a couple of weeks to find out but now is a good time to create some rumors of what we think might happen :)

  • Like 2

Share this post


Link to post
Share on other sites
Posted · Time For Something New

 

It's going to be a lawn mower ;)

 

A reverse lawn mower that prints grass?

 

additive manufacturing!

Share this post


Link to post
Share on other sites
Posted (edited) · Time For Something New

So can you adjust the grass height in cura?

 

I don't usually talk about things that are under NDA, obviously, but I'm sorry to say, they're moving over to MakerWare, no height adjustment will be available.

Edited by Guest
  • Like 1

Share this post


Link to post
Share on other sites
Posted · Time For Something New

Buy 12 Ultimower© Handheld final grass solutions™ with different predefined heights. This way you will never have to tweak these silly things in software ever again!

  • Like 1

Share this post


Link to post
Share on other sites
Posted (edited) · Time For Something New

You will need to buy one land mower for each height of grass you have $$$

18ln09mcib9wmjpg.jpg

Damn @nallath had the same idea... you clever man

Edited by Guest
  • Like 1

Share this post


Link to post
Share on other sites
Posted · Time For Something New

If I buy 12 do I get one free? And if we are the first to pre-order do we get a set of ginsu knives?

Share this post


Link to post
Share on other sites
Posted · Time For Something New

The first 200 people to call get a set of Ginsu knives and a special three month UltiCare Plan™

Share this post


Link to post
Share on other sites
Posted · Time For Something New

Well although that sounds good. someone else mows my lawns

I was hoping you would come up with something a bit more exciting.

Something like a auto bar tender. that will mix your drinks and add ice.

maybe able to draw a 3d item with the liquids that will hover in you class, instead of just having the usual layered look

[media-thumb=5148][/media-thumb]

  • Like 1

Share this post


Link to post
Share on other sites
Posted · Time For Something New

Something like a auto bar tender.

 

I can't confirm or deny that we are working on the UltiBarTender™

Share this post


Link to post
Share on other sites
Posted · Time For Something New

Yes, I've pondered what's new for this fall

With the Olsson block being so popular, I was hoping to see an announcement of an Ultimaker 3 with larger print volume, better feeder, print head....and makes coffee :)

Share this post


Link to post
Share on other sites
Posted (edited) · Time For Something New

Yes, I've pondered what's new for this fall  

With the Olsson block being so popular, I was hoping to see an announcement of an Ultimaker 3 with larger print volume, better feeder, print head....and makes coffee  :)

 

I would totally buy that! mmmm.. coffee.

Edited by Guest

Share this post


Link to post
Share on other sites
Posted · Time For Something New

UM3 would be cool.

Maybe some upgrade kits for UM2 and UM3 release at CES in January?

Other manufactures have come out with laser engravers, 3D scanners and paste extruders.

So wonder if UM will go down that path.

Share this post


Link to post
Share on other sites
Posted · Time For Something New

I was planning to buy an Ultimaker 2 extended too, but I'll wait a few months to make sure I don't miss the new one. (in case they release some new stuff)

Again, if they are smart marketeers @Ultimaker they give an Olsson block for free with the UM2 :-)

Share this post


Link to post
Share on other sites
Posted · Time For Something New

be careful what you wish for - with this years releases it could be a completely re-engineered cardboard box, more in line with the 'branding' that you can't get into, and does not have a printer in, because that will be developed and released when it is ready ......

you could not make it up :) (this is only a gentle ribbing - no offence intended!)

  • Like 1

Share this post


Link to post
Share on other sites
Posted · Time For Something New

Drat! jameshs caught us. We've been secretly using all the engineering hours to build a moon laser instead of creating an actual 3d printer. As we had to deliver something to our management, we did think of handing in a cardboard box. Now we have to think of something else :(

Share this post


Link to post
Share on other sites
Posted · Time For Something New

I'm just waiting for your Project nallath I want something different to play with.

 

it's soooo close...

Share this post


Link to post
Share on other sites
Posted · Time For Something New

2015-09-24 12:48:22,903 - ERROR - An exception occured while trying to read preferences file: 'general'

2015-09-24 12:48:22,934 - DEBUG - Setting active view to MeshView

2015-09-24 12:48:24,260 - DEBUG - Loaded theme C:\Program Files (x86)\Cura_15.09.83\resources\themes\curamoonlaser

2015-09-24 12:48:25,717 - DEBUG - Calculating moon's normals took 0.0009999275207519531 seconds

2015-09-24 12:48:25,717 - DEBUG - Loaded a mesh with 100500 vertices

2015-09-24 12:48:25,723 - DEBUG - Loading mesh took 0.13600802421569824 seconds

2015-09-24 12:48:25,880 - DEBUG - Preparing to send slice data to engine.

2015-09-24 12:48:26,240 - DEBUG - Backend connected on port 49674

2015-09-24 12:48:49,083 - DEBUG - Preparing to send slice data to engine.

2015-09-24 12:48:49,110 - DEBUG - Sending moon to engine for slicing.

Oops, program fault, and will be closed/

And as result:

Ultimoonmaker.thumb.png.b2155b1f2409e800c71045fc587511ef.png

Ultimoonmaker.thumb.png.b2155b1f2409e800c71045fc587511ef.png

Share this post


Link to post
Share on other sites
Posted · Time For Something New

 

I'm just waiting for your Project nallath I want something different to play with.

 

it's soooo close...

 

Yay

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 96 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!