Jump to content
Sign in to follow this  
alberto

Belt tensions

Recommended Posts

Posted · Belt tensions

After making some prints, I went back to fix the belt tensions as the printer seemed unable to print good-looking round forms.

By adding some additional tensioners on the x-axis belt the prints improved, however the X stepper belt seems to have loosened after the assembly. When the stepper changes rotation direction, I can clearly see the belt move a little sideways.

Unfortunately I cannot tension it anymore, as the stepper is already at the lowest position allowed by the mounting holes.

Before extending these holes, any other point to check or suggestions?

Share this post


Link to post
Share on other sites
Posted · Belt tensions
the X stepper belt seems to have loosened after the assembly. When the stepper changes rotation direction, I can clearly see the belt move a little sideways.

Small side movements are not really a sign for belt slack, but misaligned pinions, and are not detrimental to the printing process.

 

Unfortunately I cannot tension it anymore, as the stepper is already at the lowest position allowed by the mounting holes. Before extending these holes, any other point to check or suggestions?

If your belts make the spoing sound when plucked, you're good. Otherwise extent the stepper mounting holes, I did that as well.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 14 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!