Jump to content

Recommended Posts

Posted · 232 Communication

I would like to attach a comms cable (232) to my UMO+ so that I can monitor it's status and maybe trigger commands.

This (I believe) is essentially the same as the USB connection, but I am wondering if some of the spare pins on the motherboard can be used as a Tx and Rx...

Has anyone done this or have any idea if it's possible?

  • Like 1

Share this post


Link to post
Share on other sites
Posted · 232 Communication

Certainly will.

Serial 3 looks like my ticket, 2, 3 + 4 is all that's needed.

Can you post the full image for me, can't seem to find it...

Share this post


Link to post
Share on other sites
Posted · 232 Communication

Perfect, thanks.

Might not be able to have a bash at this for a couple of days but will update with anything I manage to do.

  • Like 1

Share this post


Link to post
Share on other sites
Posted · 232 Communication

I had a little success with this today.

I used the J22 connectors to connect a 232 cable to my processor (Crestron)

I had to edit Configuration.h slightly

#define SERIAL_PORT 2 \\was #define SERIAL_PORT 0

and

#define BAUDRATE 115200 \\was #define BAUDRATE 250000

I only had to change the baud rate as my processor doesn't support 250000

When I power up the board I get a reasuring barrage of start up data...

start

echo:Marlin1.0.0

echo: Last Updated: Oct 20 2015 17:12:59 | Author: (David Braam)

Compiled: Oct 20 2015

echo: Free Memory: 3840 PlannerBufferBytes: 1232

echo:Hardcoded Default Settings Loaded

echo:Steps per unit:

echo: M92 X78.74 Y78.74 Z200.00 E836.00

echo:Maximum feedrates (mm/s):

echo: M203 X500.00 Y500.00 Z30.00 E25.00

echo:Maximum Acceleration (mm/s2):

echo: M201 X9000 Y9000 Z100 E10000

echo:Acceleration: S=acceleration, T=retract acceleration

echo: M204 S4000.00 T3000.00

echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)

echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00

echo:Home offset (mm):

echo: M206 X0.00 Y0.00 Z0.00

echo:PID settings:

echo: M301 P22.20 I1.08 D114.00

Using tool 0.

echo:SD card ok

This tells me that I am definitely connected, the tx and rx are the right way round and the baud rates match on both devices.

Once this happens I then get

echo:Unknown command: ""

every few seconds. It seems like it is monitoring for commands and if it gets nothing then it gets upset. I'm not too bothered about that yet, what I really need to work out is why it doesn't respond when I do send commands.

I'm also not sure yet what commands I can send to get information I need or to control the printer. (have tried some G and M codes but none of them seem to work)

I think I may have to enable serial 2 to accept and handle control commands somehow...

But serial communication is a good start.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 19 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!