Jump to content
Ultimaker Community of 3D Printing Experts

I cannot set the temperature of the hot bed.


swq0603
 Share

Recommended Posts

Posted · I cannot set the temperature of the hot bed.

Just a short question of my Cura 15.02.1. I cannot set the temperature of the hot bed as following. So I have to use a fix temperature each time. Did someone hit the same issue as me? Thanks in advance!myimage.JPG.9f0aa4c9f1a3f8016fb87971a4700fbc.JPG

Thanks,

Vincent

myimage.JPG.9f0aa4c9f1a3f8016fb87971a4700fbc.JPG

  • Link to post
    Share on other sites

    Posted · I cannot set the temperature of the hot bed.

    on the UM2 this is done on the printer its self under material settings not in cura.

    You can create a new material profile and save a different temperature under that profile or you can edit a current profile on the printer.

    If you want to change it in cura the you need to change the Gcode Flavor under machine settings to RepRap.

  • Link to post
    Share on other sites

    Posted · I cannot set the temperature of the hot bed.

    Very happy to see your quick answer again.:D I have found the setting on my machine. Thanks again!

    Thanks,

    Vincent

     

    on the UM2 this is done on the printer its self under material settings not in cura.

    You can create a new material profile and save a different temperature under that profile or you can edit a current profile on the printer.

    If you want to change it in cura the you need to change the Gcode Flavor under machine settings to RepRap.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...