Jump to content
Ultimaker Community of 3D Printing Experts

ULTIMAKER Filament Print temp?


Recommended Posts

Posted · ULTIMAKER Filament Print temp?

There is not 1 temperature for filament, it depends on print layer and speed as well.

I would recommend to read this blog, we dedicated a part to print profiles.

Bed temps is 60ºC for PLA, 100ºC for ABS and CPE.

For PLA you usually don't need glue unless it is a pretty big print.

You could use a regular glue stick.

For ABS we do recommend to use a glue stick.

  • Link to post
    Share on other sites
    Posted · ULTIMAKER Filament Print temp?

    There is not 1 temperature for filament, it depends on print layer and speed as well.

    I would recommend to read this blog, we dedicated a part to print profiles.

    Bed temps is 60ºC for PLA, 100ºC for ABS and CPE.

    For PLA you usually don't need glue unless it is a pretty big print.

    You could use a regular glue stick.

    For ABS we do recommend to use a glue stick.

     

    CAN'T FIND IT :(
  • Link to post
    Share on other sites
    Posted · ULTIMAKER Filament Print temp?

     

    There is not 1 temperature for filament, it depends on print layer and speed as well.

    I would recommend to read this blog, we dedicated a part to print profiles.

    Bed temps is 60ºC for PLA, 100ºC for ABS and CPE.

    For PLA you usually don't need glue unless it is a pretty big print.

    You could use a regular glue stick.

    For ABS we do recommend to use a glue stick.

     

    CAN'T FIND IT :(

     

    It is at the bottom of the blog.

    And watch your capslock.

  • Link to post
    Share on other sites
    Posted · ULTIMAKER Filament Print temp?

     

    I missed that blog post    That's a good read....bookmarked!

     

    In your settings you can choose to receive notifications when we publish a new blog post. You never have to miss anything again :D

     

    great tip thnx! when will the next part "printing" be published?

    very interesting read was part 1 btw, thanks a lot for that!

  • Link to post
    Share on other sites
    Posted · ULTIMAKER Filament Print temp?

     

     

    I missed that blog post    That's a good read....bookmarked!

     

    In your settings you can choose to receive notifications when we publish a new blog post. You never have to miss anything again :D

     

    great tip thnx! when will the next part "printing" be published?

    very interesting read was part 1 btw, thanks a lot for that!

     

    can you replay a link ? i can't find it

  • Link to post
    Share on other sites
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...