Jump to content
Cura Connect | Survey Read more... ×
Ultimaker Community of 3D Printing Experts
mkoenig

Cutting up 3D images to smaller parts?

Recommended Posts

use 3d software, its usually called slice (3dsmax) or cut or multicut tool (maya), or something. if you want to improve the quality of your models, you're gonna have to learn 3d software im afraid, theres no avoiding it, unless you have nice friends who will immediately do things for you so you can progress. modern day 3d printing requires knowledge of craftwork, 3d design, 2d design, support material understanding, material thermodynamic properties (ABS or PLA and warping), 3d printer variables, artistry, sanding, gluing, painting (if you want), finishing, buffing (if you want) and many more little bits of knowledge.

You need all these skills unless someone else deals with them for you. You can get lucky but your luck will run out eventually if you don't really understand why certain things are happening that you don want to happen.

5a3313a706906_ScreenShot2015-11-13at20_01_51.thumb.png.f6b0548e1ba8b138db5706c17996a267.png

5a3313a72c8bd_ScreenShot2015-11-13at20_03_53.thumb.png.62714766e214ccdc6cdec09f6c2e57ad.png

all 3d software has this basic tool. But that is the easy part. You then need to cap it after the slice unless it does it automatically (which can be very dangerous)! and be VERY careful of intersecting geometry!!!!

I suggest reading as must as you can, but also experience, as not everything you read it true! you need to do your own research to bunk false comments. Don't believe everything you read. do it your way if it works untill it stops working.

5a3313a706906_ScreenShot2015-11-13at20_01_51.thumb.png.f6b0548e1ba8b138db5706c17996a267.png

5a3313a72c8bd_ScreenShot2015-11-13at20_03_53.thumb.png.62714766e214ccdc6cdec09f6c2e57ad.png

Edited by Guest

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Architect Design Contest | People
      The goal of this contest is to design a set of people figurines that could be used in such a project to make an area, office or mall seem populated. 
      Think of different types of people in different environments, like walking people, people standing still, working people, and both men and women.
       
      • 9 replies
    • Taking Advantage of DfAM
      This is a statement that’s often made about AM/3DP. I'll focus on the way DfAM can take advantage of some of the unique capabilities that AM and 3DP have to offer. I personally think that the use of AM/3DP for light-weighting is one of it’s most exciting possibilities and one that could play a key part in the sustainability of design and manufacturing in the future.
        • Like
      • 3 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!