Jump to content
Ultimaker Community of 3D Printing Experts
Maarten77

ultimaker original best heated bed?

Recommended Posts

It's a lot of work to create your own. The one from Ultimaker is amazing because it completely rebuilds the platform which was the weakest part - before the upgrade I was releveling between every print. Now I can level once and a month later it's still fine even after removing the glass and putting it back in. Even after wacking pretty hard to get prints off the bed when they stick extra well.

It's a huge improvement that you wont get with just the heat part.

Share this post


Link to post
Share on other sites

I researched doing my own and the experimentation factor is pretty high.

I bought the upgrade and am going to install it soon. I work weekends so my free time hasn't been much lately.

I would suggest you re-consider and go with something that was tested extensively and well documented. Sometimes spending a little more saves you a lot of troubleshooting later

Share this post


Link to post
Share on other sites

There was a kit sold on ebay by a guy here on the forums, Jason_HK is his username, if you search for it I'm sure you'll find it...

I have that kit, and I'm very very happy with my current setup - However, I made quite a lot of other changes as well, like converting the whole system to 24V, and running off a different electronics platform (Rumba), which is probably needed to make it work really well...

It was however designed to be used with the UMO, but you need to use a switching relay, and a stronger power supply.

Since you would connect the heatbed to the PSU via the relay and not through the board, you can actually choose to have a seperate PSU just for the HB, it can then run eg. 24V and thereby heat faster, while the printer is still running 19V of its normal PSU).

I think its the heatbed itself is somewhat the same as this (the kit included more pieces like the relay itself, and I also got some borosilicate glass to put on top):

http://www.ebay.co.uk/itm/Heated-Bed-Kit-Aluminium-Plate-with-Temperature-Sensor-for-Ultimaker-3D-Printers-/221520299135?hash=item3393a3847f:g:rKgAAOSwVFlT6Jd1

Edited by Guest
  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Introducing Ultimaker Cura 3.6 | Beta
      Ultimaker Cura 3.6 | Beta is available. It comes with new features, bug fixes, and UX improvements. We would really like to have your feedback on it to make our stable release as good as it can be. As always, you can download the beta for free from our website, for Windows, MacOS, and Linux.
        • Like
      • 92 replies
    • Print Core CC | Red for Ruby
      Q: For some users, abrasive materials may be a new subject matter. Can you explain what it is that makes a material abrasive when you are not sure which print core to use?
      A: Materials which are hard in a solid piece (like metals, ceramics and carbon fibers) will generally also wear down the nozzle. In general one should assume...
        • Like
      • 30 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!