Jump to content
Ultimaker Community of 3D Printing Experts
jweaver

Can I correct over-extrusion in CURA?

Recommended Posts

I am using Cura with a Printerbot and its been flawless.. But my Hot End has been jamming frequently causing my extruder struggle and I decided to change it.

I originally planned to go for the UBIS Metal.. But after ordering it I read a lot of horror stories so in the end bit the bullet and went for an E3D.

Problem is, I am now getting terrible prints.. When I get the nozzle set low enough for the job to stick, it then scrapes/scratches the job as it prints

The theory is that I am over extruding and wonder if there are any settings I could use in Cura to experiment..

I assumed the "Flow %" value would do it, but I have read it does nothing.

Is there an easy way to reduce my extrusion rate to see if I can get this under control?

Jon

Share this post


Link to post
Share on other sites

Change the steps per mm of your extruder.

 

I am getting inconsistent results to my measurements of the extruder so have been unable to calculate the correct value.. But I guess if I make a note of what it is now, and crudely make adjustments (Without doing the maths) I can see the effects of under/over extrusion.

What exactly does "Flow%" do? WOuld that not cause the printer to extrude less/more than it should?

Jon

Share this post


Link to post
Share on other sites

It should change the amount of material extruded. Where have you read that the flow does nothing?

 

:) i read a comment on another forum and then i assumed you confirmed it above.

I am sure it does something as the "cost" (and lengh of filament used) changes when you alter the flow.

So my wuestioj stands.. would the flow have the same effect as changing the Steps per mm?

I just want a dynamic option i can easily change to do some tests.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Introducing Ultimaker Cura 3.6 | Beta
      Ultimaker Cura 3.6 | Beta is available. It comes with new features, bug fixes, and UX improvements. We would really like to have your feedback on it to make our stable release as good as it can be. As always, you can download the beta for free from our website, for Windows, MacOS, and Linux.
        • Like
      • 95 replies
    • Print Core CC | Red for Ruby
      Q: For some users, abrasive materials may be a new subject matter. Can you explain what it is that makes a material abrasive when you are not sure which print core to use?
      A: Materials which are hard in a solid piece (like metals, ceramics and carbon fibers) will generally also wear down the nozzle. In general one should assume...
        • Like
      • 30 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!