Jump to content
Ultimaker Community of 3D Printing Experts
  • Sign Up

Could Cura be causing this?

Recommended Posts

Posted · Could Cura be causing this?

I'm just starting out and I've made a few things successfully and now I was trying to see if I could make something big. So I did this complicated design in SketchUp and I thought it might be a good idea to try a 1/4 scale print just to make sure it was good and it literally printed a gray ball of fluff. So I backed up to the basic shape I started with and found Solidworks2. Checked the mesh for holes and it printed it out (see picture, shape on the right). Then I went to the next step and added a couple shapes and ran it through Solidworks2 again. When it printed it went back to a giant blob (see picture,shape on the left). I'm just not sure what to do next? Here is where it gets really complicated, I have to use Cura 17.10 because the computer designs for the Ultimaker2 and the Lulzbot Taz 5. You just pick your machine in Cura and it loads the profile of the machine you are outputting to. I'll open to any ideas at this point I've been beating my head on the desk for 17 days trying to get this to work. I've thrown it all away and restarted from scratch four times.

Here is the picture, https://drive.google.com/file/d/0B6Qt_aaNkZ8kOFJrT1FkaHgxNEE/view?usp=sharing

Here is the model. https://drive.google.com/file/d/0B6Qt_aaNkZ8kVHRFVUFrMjlidUE/view?usp=sharing

Here is the gcode. https://drive.google.com/file/d/0B6Qt_aaNkZ8kb3pQWjNiOWk0UHc/view?usp=sharing

Here are the settings for Cura, sorry I'm not sure what is important here.

:Running: /Applications/Cura/Cura.app/Contents/Resources/CuraEngine -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode= -s supportXYDistance=700 -s insetXSpeed=25 -s retractionZHop=0 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s gcodeFlavor=1 -s postSwitchExtruderCode= -s retractionSpeed=40 -s filamentFlow=100 -s infillOverlap=15 -s inset0Speed=25 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=6 -s initialLayerSpeed=20 -s minimalLayerTime=5 -s infillSpeed=25 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s supportEverywhere=0 -s filamentDiameter=2850 -s initialLayerThickness=300 -s supportAngle=-1 -s fanFullOnLayerNr=47 -s extruderOffset[1].X=18000 -s extruderOffset[1].Y=0 -s layerThickness=100 -s endCode=M25 ;Stop reading from this point on.


-s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=2500 -s skirtMinLength=150000 -s objectSink=0 -s retractionAmount=4500 -s skinSpeed=25 -s skirtLineCount=1 -s startCode= -s skirtDistance=3000 -s zOffset=0 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=25 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=150 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s sparseInfillLineDistance=4000 -s insetCount=2 -s downSkinCount=6 -s multiVolumeOverlap=150 -g 49674 -s posx=115000 -s posy=112500 $

Cura_SteamEngine version 17.10

Copyright © 2014 David Braam

This program is free software: you can redistribute it and/or modify

it under the terms of the GNU Affero General Public License as published by

the Free Software Foundation, either version 3 of the License, or

(at your option) any later version.

This program is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of


GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License

along with this program. If not, see .

Default config 'default.cfg' not used

Reading mesh from socket with 972 vertexes

Loaded from disk in 0.004s

Analyzing and optimizing model...

Face counts: 324 -> 324 100.0%

Vertex counts: 972 -> 149 15.3%

Size: 49.032000 18.216000 44.257000

vMin: 90.484000 103.392000 0.000000

vMax: 139.516000 121.608000 44.257000

vMin: -24.516000 -9.108000 0.000000

vMax: 24.516000 9.108000 44.257000

Matrix: 1.000000 0.000000 0.000000

Matrix: 0.000000 1.000000 0.000000

Matrix: 0.000000 0.000000 1.000000

Optimize model 0.000s

Slicing model...

Layer count: 441

Sliced model in 0.022s

Generating support map...

Generating layer parts...

Generated layer parts in 0.007s

Generated inset in 0.032s

Generated up/down skin in 0.031s

Wrote layers in 0.04s.

Total time elapsed 0.14s.

Slicer process returned : 0

Share this post

Link to post
Share on other sites
Posted · Could Cura be causing this?

First of all never print anything without checking in cura layer view first. I assume your model is skipping over some layers (happens a lot with sketchup models). This should be visible in layer view. When you get real good at it you can zip through every layer in well under a minute. However is it possible your part wasn't sticking to the surface and getting dragged around? I'm going to assume not.

Sketchup isn't very good at making 3d real things. It's great for making photos and videos and drawings but not physical things. Solidworks and other modern CAD programs work better. having said that I have made many models using sketchup and printed them. The best trick is to look at your model in cura xray view. anything red or brown is a problem. blue or white is fine. It indicates you have internal walls or holes. You have to fix all the red. sometimes you can hack your way through using "fix horrible" checkboxes on the cura expert settings window.

Share this post

Link to post
Share on other sites
Posted · Could Cura be causing this?

The model has mistakes in it. Check the model in x-ray view. HullXRay.thumb.png.00ff0d1ffc6c6c536269ad15a2895c5f.png

Red means that there are double or open faces.


  • Like 1

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Talking additive | The 3D printing podcast
      Why should we be the only ones asking questions? Join us and ask Jabil all your questions on September 22nd 5pm CET
        • Like
      • 2 replies
    • Ultimaker masterclass: Optimizing your Ultimaker Cura workflow
      Save your seat for either broadcast on September 23.
      What will you learn?
      · Best practices for iterative print preparation and every lesson you should learn from each print
      · The right way to use per-object settings and when they are most useful
      · Easy-to-use resources for anyone who wants to develop their own printer definitions, plugins, or print profiles
      · How to optimize print profile settings and whether to “keep” or “discard” changes
      · When is the right time to export your drawing from CAD? (Based on Ultimaker Cura’s surprising power as 3D control software)
      · And a whole lot more tips and tricks!
      How can I join?
      This free masterclass will take place twice:
      1. 11am CEST (5pm SGT, 5am EDT)
      2. 5pm CEST (11am EDT, 8am PDT, 11pm SGT)
        • Like
      • 0 replies
    • Do you use 3D printing at work? Let us know
      It doesn't matter if you are using 1 Ultimaker or 10, there is inspiration in everything. We're looking for ...
      • 1 reply
  • Create New...