Jump to content

Tuning für den Ultimaker Original Plus


charger01

Recommended Posts

Posted · Tuning für den Ultimaker Original Plus

Hallo, ich habe einen Ultimaker Original Plus, also mit Heizbett und Anzeige. Ich wollte euch mal fragen, welche Upgrademöglichkeiten ich für den Drucker habe? Passt z.B. der Bondtech QR 3.0 Extruder? Der Olson Block passt nicht. Im Moment bin ich eigentlich ganz happy, aber vielleicht sind auch meine Ansprüche einfach zu niedrig ;).

Ich habe im Moment nur das Problem, dass der Drucker einfach manchmal nicht weiterdruck und ich auf dem Display das "Waiting for User" habe. Dies geschieht meistens beim Drucken der Plattform, auf der dann nachher das Objekt gedruckt wird. Ich habe keine Ahnung, warum er ausgerechnte dort immer muckt. Wenn er da durch ist druckt er das Objekt dann durch, echt komisch. Ich drucke mit Cura 15.04.2 auf einem Mac Book Air. Könnte es an der Slicing Software liegen? Gibt es eine Alternative für den Mac?

Ich würde meinen Ultimaker gerne etwas pimpen. Die low friction Filamenthalterung bin ich gerade am bauen. Leider hat mir niemand auf die Frage geantwortet, welche größe ich bei den Stehlagern bzw. Lagerböcken brauche...

Über jeden Tipp wäre ich total dankbar.

P.S. das laute Geräusch ist jetzt wieder weg, komisch. Hab gerade neue Lager und Stangen bestellt...

  • Link to post
    Share on other sites

    Posted · Tuning für den Ultimaker Original Plus

    Hallo charger01, hast du in cura das pause at height plugin aktiviert? Oder bearbeitest du den code in irgend einer form noch nach dem slicen? Könntest du mal ein kleines stl als gcode (gesliced) hochladen, dann könnte man es sich mal anschauen.

    Grüsse, Martin

  • Link to post
    Share on other sites

    Posted · Tuning für den Ultimaker Original Plus

    Übrigens, wenn du den low friction spool holder von lroberti meinst, dann entweder 626 bearings, lager oder 608. Ich habe es mit m8 / 608 gemacht (skateboard kugellager).

    Zum bondtech qr 3 kann ich nach 3 drucken nur sagen, ZIEMLICH GUT. Allerdings ja erst drei, nicht allzulange Drucke und noch kein filament wechsel (also auch nur pla). Allerdings häufen sich im moment die positiven Rückmeldungen.

    Ok?

  • Link to post
    Share on other sites

    Posted · Tuning für den Ultimaker Original Plus

    Kurz und knapp. Der Bondtech QR 3.0 Universal ist sein Geld 10 mal wert. Der Frist alles (auch Flex Material) und schiebt alles, die Drucke werden 30% besser und der retrakt wird auch sauberer. Ich konnte dadurch die Druck Geschwindigkeit von ABS bei mir verdoppeln.

    Es gibt einen Mount zum mit bestellen für den Ultimaker 1 und auch das passende Kabel.

  • Link to post
    Share on other sites

    Posted · Tuning für den Ultimaker Original Plus

    Hallo Charger

    Da steht eigentlich alles drinn. Lies mal den Post: https://ultimaker.com/en/community/18369-bondtech-qr-30-universal?page=1

    Grüsse

    Martin

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...