Jump to content

Bauanleitung für den Ultimaker Original


charger01

Recommended Posts

Posted · Bauanleitung für den Ultimaker Original

Gibt es nicht, so wie es aussieht. Du kannst ja ev. mal dort nachfragen, wo Du den Drucker gekauft hast. Allerdings vermute ich anhand Deines Profilnamens doch, dass Du mit Englisch nicht völlig auf dem Kriegsfuss stehst. ;)

  • Link to post
    Share on other sites

    Posted · Bauanleitung für den Ultimaker Original

    Hallo Charger01,

    ich habe vor zwei Wochen auch einen Ultimakers Original zusammen gebaut.

    Mit den Bildern kommt man schon gut zurecht. Dann kannst du ja noch den Google Übersetzer nutzen. Das klappt schon.

    Ich habe noch einen Tipp ohne Gewähr..

    Bei meinem waren die Stepper Driver vom Werk aus verkehrt aufgesetzt.

    20151207_145832.thumb.jpg.e84d34ea5f69d5a92ae1e572b7130091.jpg

    Die sind dann sofort durchgebrannt. Ich habe zwar kostenlos Ersatz bekommen. Trotzdem war das sehr ärgerlich.

    Auf der Ultimaker Webseite konnte ich sehen wie es richtig ist.

    Nur so habe ich den Fehler überhaupt gefunden.

    UM-parts_38.png

    Alle Angaben ohne Gewähr.

    Viel Erfolg

    20151207_145832.thumb.jpg.e84d34ea5f69d5a92ae1e572b7130091.jpg

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...