Jump to content
anakin

Slicing misses sections of final edge

Recommended Posts

Posted · Slicing misses sections of final edge

5a331578e0038_ScreenShot2015-12-21at11_07_01PM.thumb.png.69dc6df24088c47c375b9a85964c2b91.png5a331578b631e_ScreenShot2015-12-21at11_06_51PM.thumb.png.3326d6bc3e1a98b5cb800ce955885a62.png

The main view looks right, but the layer view is missing sections. The xray view shows all purple. That last edge is 0.4mm. I tried all 4 print profiles, but they all come back the same. I even tried uploading the STL to Microsoft Model repair, with no luck.

Any ideas what has gone wrong?

5a331578e0038_ScreenShot2015-12-21at11_07_01PM.thumb.png.69dc6df24088c47c375b9a85964c2b91.png

5a331578b631e_ScreenShot2015-12-21at11_06_51PM.thumb.png.3326d6bc3e1a98b5cb800ce955885a62.png

Share this post


Link to post
Share on other sites
Posted · Slicing misses sections of final edge

Turns out I get to answer my own question. I didn't allow for tolerances within the printing. Increasing that last edge from 0.4 mm to 0.5mm seems to have filled in the missing sections.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!