Jump to content
Ultimaker Community of 3D Printing Experts

Runtime Stat Reset after changing filament.


Morandir
 Share

Recommended Posts

Posted · Runtime Stat Reset after changing filament.

Greetings,

I'm excited to say I've gone through my first roll of filament with a (previously) new Ultimaker 2Ext. Now that I'm loading in the new filament, I was looking for a way to reset the Material portion of the runtime stats so I can have a good idea of the meters remaining on my spool.

Is this possible? I haven't seen how, so I'm thinking I'm going to have to write meters of material used on my 2nd spool.

If not, this would be a handy feature to have. Knowing that .75kg of 2.85mm ABS is ~113m is helping me plan out my overnight prints free from worry.

  • Link to post
    Share on other sites

    Posted · Runtime Stat Reset after changing filament.

    There is no way to reset this on the machine unless you hack it somehow.

    there is some info about it HERE

    you might be interested in THIS also. It will pause the printer if the filament runs out.

    A lot of people change to different filaments after just 1 print so this feature is not so useful but I could see that a roll meter would be good for those who don't.

  • Link to post
    Share on other sites

    Posted · Runtime Stat Reset after changing filament.

    Thank you for pointing me in this direction. I'll probably leave well enough alone when it comes to hacking the board directly. The filament monitor is an interesting add on. I'll look into it some more.

    For now I just lap jointed the two filaments together w/ABS and a clamp. Seemed to do the trick and spares me from counting down remaining meters.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...