Jump to content

ugly surfaces


SG91

Recommended Posts

Posted · ugly surfaces

If this wall is .4 or under then it will be hard to get a nice finish in that section. 2 passes on a thin wall is best. You can set the nozzle size smaller then the actual nozzle size and still get good results down to 0.3mm I have gone smaller but its hard from that point to get the same results. if you are able to this and get 2 passes in this area then that would be good.

  • Like 1
Link to post
Share on other sites

Posted (edited) · ugly surfaces

at the walls it goes back and forth 1 time. what I can see.

So annoying with un necessary blobs, it ruins the finish. And if you start to file or cut it gonna scratch everything.

DSC_5346.thumb.JPG.3d8048c32b7f18a4aacd4fd22ae14c9d.JPG

DSC_5352.thumb.JPG.82fa3e3caf22e176f0124ffcd5fc9d7d.JPG

DSC_5350.thumb.JPG.3b78dcc991db605f4fd859482c77cf89.JPG

DSC_5347.thumb.JPG.4a654cfa90998a73a4931c6fd4b476df.JPG

 

If this wall is .4 or under then it will be hard to get a nice finish in that section. 2 passes on a thin wall is best. You can set the nozzle size smaller then the actual nozzle size and still get good results down to 0.3mm I have gone smaller but its hard from that point to get the same results. if you are able to this and get 2 passes in this area then that would be good.

 

DSC_5346.thumb.JPG.3d8048c32b7f18a4aacd4fd22ae14c9d.JPG

DSC_5352.thumb.JPG.82fa3e3caf22e176f0124ffcd5fc9d7d.JPG

DSC_5350.thumb.JPG.3b78dcc991db605f4fd859482c77cf89.JPG

DSC_5347.thumb.JPG.4a654cfa90998a73a4931c6fd4b476df.JPG

Edited by Guest
  • Link to post
    Share on other sites

    Posted (edited) · ugly surfaces

    Kinda off topic but, can some1 help me change gcodes?

    Would like to do this

    1. If possible remove the auto home function just before it goes to do A skirt?

    Im abit bored of having to restart 1-2times cos of oozed filament get squished around

    the nozzle. And messes around with it at the print zone.

    2. Automatic 210c first layer then go down/up to the temp I choosen in cura.

    3. At the end to make it stay at idle temps 150c + bed 60 after.

    Edited by Guest
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...