Jump to content
Ultimaker Community of 3D Printing Experts

Bed way too low?


Recommended Posts

Posted · Bed way too low?

Hi everybody!

Finally got my defective filament heater replaced and fired our Ultimaker Original+ unit up for the 1st time last night! What a build! We youtubed the entire assembly process, refined to a tee in 8 parts, that will be posted soon.

Last night we tried our first print, but the bed was way too low. The extruder emitted, the head moved in the shape of the part, both heaters worked. Tried searching for the answer here, but I got thousands of unrelated hits.

Some questions:

What have we missed? Why is the bed 15cm below the extruder when the print starts?

Also, the sound that the bed makes when traveling downwards is very different than when traveling upwards. More of a moan. Is that normal?

(We completed the paper adjustment of the bed)

Thanks!

  • Link to post
    Share on other sites
    Posted · Bed way too low?

    not an expert here, but something might go so tight that the stepper is skipping

    your extruder should be ~0.2mm above the bed, the nozzle will expand about 0.2mm when it heats up

    instead of paper use a 0.1mm steel feeler plade used to adjust spark plugs, same thickness as paper but never wears out and does not leave paper fibers

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...