Na klar, hab vorhin schon bestellt:
Grüße
Marcus
zerspaner_gerd 361
Das scheint aber nicht das gleiche Lüfter Gehäuse zu sein. Von den Bilder her.
Auf den ersten Blich hat es eine andere Öffnung, und die Optik finde ich auch nicht gerade berauschend.
Gruß Gerd
Da gebe ich Gerd recht, ob es von der form her 100%tig gleich ist kann ich nicht sagen, da ich das neue "UM Blech" nicht live gesehen habe aber die Qualität ist zumindest auf den Fotos nicht gerade berauschend, da sind wir beim alten Thema preis/Leistung. 
Gruß Florian
Hallo Marcus,
vielen Dank für deinen Besuch macht immer wieder spaß, sich auszutauschen.
LG
Alexandra
-
1
Danke, das kann ich nur zurückgeben! Der 40W Heater liegt schon bereit zum Einbau und der Bowden Tube passt super (auch bei diesen Schnellverbinder / Kupplungen aus Metall).
Wenn der neue 40W Heater eingebaut ist und das neue Lüftergehäuse angekommen, kann ich mit den ganzen Änderungsmaßnahmen (Gearbox, Tinker Firmware, etc.) dann auch hoffentlich meinen sehr holprigen Umbau auf den Olsson Block mit Erfolg abschliessen.
Vielleicht kan ich dann auch wieder meinen China Metall Feeder mit dem MK7 verwenden.
Marcus
-
Our picks
-
UltiMaker Cura 5.3 stable released
ArunC posted a topic in Ultimaker Cura,
In this stable release, Cura 5.3 achieves yet another huge leap forward in 3D printing thanks to material interlocking! As well as introducing an expanded recommended print settings menu and lots of print quality improvements. Not to mention, a whole bunch of new printer profiles for non-UltiMaker printers!-
-
- 24 replies
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Picked By
MariMakes, -
-
Here it is. The new UltiMaker S7
MariMakes posted a topic in Official news,
The UltiMaker S7 is built on the success of the UltiMaker S5 and its design decisions were heavily based on feedback from customers.
So what’s new?
The obvious change is the S7’s height. It now includes an integrated Air Manager. This filters the exhaust air of every print and also improves build temperature stability. To further enclose the build chamber the S7 only has one magnetically latched door.
The build stack has also been completely redesigned. A PEI-coated flexible steel build plate makes a big difference to productivity. Not only do you not need tools to pop a printed part off. But we also don’t recommend using or adhesion structures for UltiMaker materials (except PC, because...it’s PC). Along with that, 4 pins and 25 magnets make it easy to replace the flex plate perfectly – even with one hand.
The re-engineered print head has an inductive sensor which reduces noise when probing the build plate. This effectively makes it much harder to not achieve a perfect first layer, improving overall print success. We also reversed the front fan direction (fewer plastic hairs, less maintenance), made the print core door magnets stronger, and add a sensor that helps avoid flooding.
The UltiMaker S7 also includes quality of life improvements:
Reliable bed tilt compensation (no more thumbscrews) 2.4 and 5 GHz Wi-Fi A 1080p camera (mounted higher for a better view) Compatibility with 280+ Marketplace materials Compatibility with S5 project files (no reslicing needed) And a whole lot more
Curious to see the S7 in action?
We’re hosting a free tech demo on February 7.
It will be live and you can ask any questions to our CTO, Miguel Calvo.
Register here for the Webinar-
-
- 18 replies
Picked By
MariMakes, -
-
.png.e7a3560300dbb24c6ece29a701a84b73.png)
Cura Alpha With New Tree Support 🎄
MariMakes posted a topic in Ultimaker Cura,
Are you a fan of tree support, but dislike the removal process and the amount of filament it uses? Then we would like to invite you to try this special release of UltiMaker Cura. Brought to you by our special community contributor @thomasrahm
We generated a special version of Cura 5.2 called 5.3.0 Alpha + Xmas. The only changes we introduced compared to UltiMaker Cura 5.2.1 are those which are needed for the new supports. So keep in mind, this is not a sneak peek for Cura 5.3 (there are some really cool new features coming up) but a spotlight release highlighting this new version of tree supports.-
-
- 22 replies
Picked By
MariMakes, -
-
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
.png.e7a3560300dbb24c6ece29a701a84b73.png)
Recommended Posts
Top Posters In This Topic
24
11
8
5
Popular Days
Feb 29
8
Mar 9
8
Feb 12
6
Feb 14
6
Top Posters In This Topic
oceanblue72 24 posts
zerspaner_gerd 11 posts
diettelo 8 posts
neotko 5 posts
Popular Days
Feb 29 2016
8 posts
Mar 9 2016
8 posts
Feb 12 2016
6 posts
Feb 14 2016
6 posts
Posted Images
diettelo 5
Hast du einen Link für mich und evtl die anderen?
Link to post
Share on other sites