Jump to content
Ultimaker Community of 3D Printing Experts

Making the Ultimaker+


Recommended Posts

Posted · Making the Ultimaker+

Now that I have enough experience of the standard Ultimaker, I really want to rebuild my Ultimaker to a Ultimaker+ with a Z length of about 50cm.

The only thing missing is the Trapezium thread for the Z-axis, where can I buy an exact same but longer version ?

I have a special project that needs the extra hight, and I don't want to spend time glueing parts together :)

  • Link to post
    Share on other sites

    Posted · Making the Ultimaker+

    Still working on the drawings, but it is the hight I want, and I still need to draw the thicker side panels, and new Z-level bearings.

    I got my eye on some bearings with supported rods, to account for movement lengthwise, this means that I will have to do a small redesign of the print bed.

    1929590.jpeg

    If you have problems with me putting the name "Ultimaker+" on it let me know :)

    it still will be 95% made from my own Ultimaker.

  • Link to post
    Share on other sites

    • 1 month later...
    Posted · Making the Ultimaker+

    After some time, I started back on my Ultimaker+ build,

    I received all the necessary parts I need, and I made the 3D drawing to match the parts I have,

    so I can CNC the case parts.

    The outer shape is already cut, and only need all the mounting holes and openings.

    Ultimaker%2B1s.jpg

  • Link to post
    Share on other sites

    Posted · Making the Ultimaker+

    Well, I have finished the basic build of the Ultimaker+, and have now doubled the height :)

    I transplanted all (well most of) the parts of the "old" Ultimaker into the new one, I did have to make some alterations, mostly because of the thicker 8mm Perspex.

    surprisingly most of the wiring was long enough to accommodate the extra height, and I only had to lengthen 3 wires from end-stops

    I did have to make a complete new printing plateau, for the supported rod bearings, this turned out to be very easy, as I kept it as simple as possible.

    The plateau feels very sturdy, and I think the supported rods feel very solid, there is no wobble in the Z-stage at all, and it moves smoothly up and down.

    I still will need to do a little tweaking here and there to get it just right, and redo some details I want to improve.

    overall I am very happy with the result, and hope the prints will look as nice as I hope they will be :lol:

    2942732.jpeg

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...