Jump to content
Ultimaker Community of 3D Printing Experts

I CAN'T PRINT IN 0.2 LAYER,WHY??HELP ME PLEASE


giulioboni1995

Recommended Posts

Posted · I CAN'T PRINT IN 0.2 LAYER,WHY??HELP ME PLEASE

What temp and speeds are you trying to print with?

What is the result of your current attempts?

Remember that it's try to push twice the amount of plastic through the nozzle as a 0.1mm layer so you need to print slower of hotter or both.

  • Link to post
    Share on other sites
    Posted · I CAN'T PRINT IN 0.2 LAYER,WHY??HELP ME PLEASE

    You initial layer thickness should be about 0.3 not 0.0

    That travel speed is really low. should be about 200mm/s

    What temps and print speed are you using?

    And photo of the print?

  • Link to post
    Share on other sites
    Posted · I CAN'T PRINT IN 0.2 LAYER,WHY??HELP ME PLEASE

    oh yes sorry, but it's a month that i've been printing in 0.1 so i have no bad prints to show, in next days i will print something in 02 in order to show it to you. ps:the temperature is 210.

     

    It would really help if you post a photo of your result and mention the printing temperature you used.

     

  • Link to post
    Share on other sites
    Posted · I CAN'T PRINT IN 0.2 LAYER,WHY??HELP ME PLEASE

    50mm x 0.2 layer x 0.6 nozzle = 6mm3 , thats 3 times the output volume compared to printing with the standard 0.4 at 0.1 layers. I would try going up to at least 220 celsius, maybe more.

    there is no "best" temperature, it depends on what you want to achieve. For a strong mechanical part go a bit hotter (=better layer bonding) for a display piece you may want to stay a bit colder, but looking at the fact you use 0.6 + 0.2 layers it's probably not a display piece.

  • Link to post
    Share on other sites
    Posted · I CAN'T PRINT IN 0.2 LAYER,WHY??HELP ME PLEASE

    Try printing at 220 or 230

  • Link to post
    Share on other sites
    Posted · I CAN'T PRINT IN 0.2 LAYER,WHY??HELP ME PLEASE

    Do youmean to cut off 84mm from the bottom of your print? If your model is shorter than 84mm you will not print anything even if you temp. is 300!!!!!

  • Link to post
    Share on other sites
    Posted · I CAN'T PRINT IN 0.2 LAYER,WHY??HELP ME PLEASE

    It looks like it still has 6 hours print time so must be a big model

  • Link to post
    Share on other sites
    Posted · I CAN'T PRINT IN 0.2 LAYER,WHY??HELP ME PLEASE

    yes i have cut it, but the problem is not the cut, the fact that doesn't print in 02 happens with avery model

    Do youmean to cut off 84mm from the bottom of your print? If your model is shorter than 84mm you will not print anything even if you temp. is 300!!!!!

  • Link to post
    Share on other sites
    Posted · I CAN'T PRINT IN 0.2 LAYER,WHY??HELP ME PLEASE

    but also with pla?

    50mm x 0.2 layer x 0.6 nozzle = 6mm3 , thats 3 times the output volume compared to printing with the standard 0.4 at 0.1 layers.  I would try going up to at least 220 celsius, maybe more.

    there is no "best" temperature, it depends on what you want to achieve. For a strong mechanical part go a bit hotter (=better layer bonding) for a display piece you may want to stay a bit colder, but looking at the fact you use 0.6 + 0.2 layers it's probably not a display piece.

  • Link to post
    Share on other sites
    Posted · I CAN'T PRINT IN 0.2 LAYER,WHY??HELP ME PLEASE

    but also with pla?

    50mm x 0.2 layer x 0.6 nozzle = 6mm3 , thats 3 times the output volume compared to printing with the standard 0.4 at 0.1 layers.  I would try going up to at least 220 celsius, maybe more.

    there is no "best" temperature, it depends on what you want to achieve. For a strong mechanical part go a bit hotter (=better layer bonding) for a display piece you may want to stay a bit colder, but looking at the fact you use 0.6 + 0.2 layers it's probably not a display piece.

    Yes.
  • Link to post
    Share on other sites

    Archived

    This topic is now archived and is closed to further replies.

    ×
    ×
    • Create New...