Jump to content
JuanSens

ERROR STOPPED : Heater Error after install OLSSON BLOCK

Recommended Posts

Posted · ERROR STOPPED : Heater Error after install OLSSON BLOCK

Hello

I just install the olsson block in my ultimaker 2.

I can print but if I try print again, I recieve this mensage: ERROR STOPPED : Heater Error. I have to restar ultimaker to can print again.

Greetings

Share this post


Link to post
Share on other sites
Posted · ERROR STOPPED : Heater Error after install OLSSON BLOCK

Hi,

Yes, I followed it.

PT100 is inserted fully into the Olsson Block.

It seem work fine because printed well one piece.

thanks for answer

Share this post


Link to post
Share on other sites
Posted · ERROR STOPPED : Heater Error after install OLSSON BLOCK

Ok, another idea. Did you change your fan shroud? If you get the temp error only sometimes, it could mean that too much air hits the nozzle and the heater can't heat up fast enough triggering the temp error.

I am using this fan shroud and it works really well (printed in colorFabb XT).

https://www.youmagine.com/designs/fan-mount-um2-olsson-block

Share this post


Link to post
Share on other sites
Posted · ERROR STOPPED : Heater Error after install OLSSON BLOCK

I had a lot of problems with this error. I print with ABS and I think that the combination of the increased temperature requirement, together with fan cooling, caused the problem.

Lately, I have disabled the fan altogether when printing ABS - I have had no problems with the heater error since then.

I also re-downloaded firmware to the UM2, but I can't say if this helped or not.

As a backup, I have bought a 35W heater - I think the heater error you are seeing is related to a weak 25W heater element, that comes with the UM2 as standard - as a last resort this might be worth trying, but slowing down the fan or switching it off altogether (for ABS anyway) is a good thing to try.

best of luck!

  • Like 1

Share this post


Link to post
Share on other sites
Posted · ERROR STOPPED : Heater Error after install OLSSON BLOCK

I had this error after installing the Olsson Block.

The Olsson block was touching my fan shroud, causing it to cool rapidly.

We simply screwed the metal coupler slightly tighter into the Olsson Block so that the Olsson block was not touching the fan shroud and this solved the error.

  • Like 1

Share this post


Link to post
Share on other sites
Posted · ERROR STOPPED : Heater Error after install OLSSON BLOCK

The last 2 answers are excellent but I want to add what "heater error" means:

heater error (as opposed to error stopped - temp sensor)

You get an error if the heater can't move a certain amount in a certain time while driving full power (when it is close to goal temp it typically runs well below full power):

Firmware

Version

14.09 - does not have the feature

14.12 oct 16, 2014 - feature introduced. 20C in 20 Seconds

14.12.1 dec 15, 2014 - from 20C to 10C (still in 20 seconds)

15.01 jan 14, 2015 - from 20 secs to 30 secs (now 10C in 30 seconds)

As of March 2016 I'm pretty sure these values haven't changed and are still at the values they were for version 15.01.

  • Like 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 23 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!