Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

  • 2 weeks later...
Posted · Buying Used Ultimaker2

I have a lightly used UM2 that has been converted to 1.75 mm filament using the olsson block kit sold by GR8 here on the forum. I have the 3mm nozzle that came with the printer that you could use to convert it back if needed. I am looking to get $1700 and can ship anywhere in the continental US for that price. Shipping oversea's I would have to see what the cost would be. Open to offers so if you interested let me know.

Thanks,

Chad

  • Link to post
    Share on other sites
    Posted · Buying Used Ultimaker2

    If you're in Europe you may want to have a look at the Belgium reseller Trideus, they still have some NEW ultimaker2 's in stock and there selling them now for 1650, including olsson block.... They are not upgraded to 2+, but you can always buy the new feeder later when it becomes available for sale separately.

    https://ultimaker.com/en/community/20286-ultimaker-2-promotie

    http://www.trideus.be/nl/ultimaker-2.html

  • Link to post
    Share on other sites
    Posted · Buying Used Ultimaker2

    There's been a few in the United States that show up on eBay. However, it looks like the same person keeps scooping them up! (Not me!)

  • Link to post
    Share on other sites
    Posted · Buying Used Ultimaker2

    Hi, if you are still interested, have a look at my UM2 ads on gumtree

    https://www.gumtree.com/p/for-sale/lightly-used-ultimaker-2-3d-printer-for-sale/1176662621

  • Link to post
    Share on other sites
    Posted · Buying Used Ultimaker2

    Looking for for a used UM my self. Budget is always a concern. Saw one here in PDX sold.

    so bummed out it wasn't on craigslist, PDX home of craigslist.. LOL

    One thing I worry about is getting a china clone. How can you tell them apart from pic's?

    Ed

  • Link to post
    Share on other sites
    Posted · Buying Used Ultimaker2

    I have a lightly used UM2 that has been converted to 1.75 mm filament using the olsson block kit sold by GR8 here on the forum. I have the 3mm nozzle that came with the printer that you could use to convert it back if needed. I am looking to get $1700 and can ship anywhere in the continental US for that price. Shipping oversea's I would have to see what the cost would be. Open to offers so if you interested let me know.

    Thanks,

    Chad

     

    I would be interested in knowing more about your machine for sale. pic's? any filament going with it?

    Thanks Ed

  • Link to post
    Share on other sites
    Posted · Buying Used Ultimaker2

    I would point out ultimaker 2 extended with 3 rolls,600 hours print time went for under $1500 on ebay . If pay day came sooner it would have been mine. :-)

    Ed

  • Link to post
    Share on other sites
    Posted · Buying Used Ultimaker2

    Who's the guy who just got a new Ultimaker 2 for a $1000. off of e-bay?

    That right this guy! Yes!

    after unpacking it, I really think this thing just sat somewhere in it's box.

    If I'm right it only has a 1 hour print time on it. and 19 hours on time.

    ED

    • Like 2
    Link to post
    Share on other sites
    Posted · Buying Used Ultimaker2

    Nice find...those always show up on auction just after I've paid all my bills.

    Timing!

  • Link to post
    Share on other sites
    Posted · Buying Used Ultimaker2

    Nice find...those always show up on auction just after I've paid all my bills.

    Timing!

     

    Yea I missed out on the UM2+ extended for $1500.

    I sure my machine is years old, sat in a box somewhere.

    It doesn't have the extra filament guide or the hole for it.

  • Link to post
    Share on other sites
    Posted · Buying Used Ultimaker2

    I'm actually selling my Ultimaker 2 with a couple rolls of used filament at various lengths. Probably 30-40 hours of print time. Asking $1600 shipped anywhere in USA.

  • Link to post
    Share on other sites
    Posted (edited) · Buying Used Ultimaker2

    I'm actually selling my Ultimaker 2 with a couple rolls of used filament at various lengths. Probably 30-40 hours of print time. Asking $1600 shipped anywhere in USA.

     

    So not saying what you're asking price is wrong.

    Justing giving some history of this summer on used ultimakers.

    I got my UM2 with Olsson block upgrade Not installed or used. $1000. $50

    At my door in 3 days. So slamming!

    The sellers are a clearing house had 150 + listings of mostly medical stuff.

    Didn't even know how many hours were on it. 1 hour 19 minutes print time.

    And I believe it machine is so clean! Printing right out of the box!

    UM2 is on close out sale now , brand new with olsen block $1900 with wantary I do believe.

    There is one on ebay right now 5 bids 6 hours to go and it's at $1030. And it has the + upgrade but didn't list hours, 2 part rolls of pla.

    Make sure you show pics of manufacture label. on the bottom of machine.

    Lot of chinese clones out their.

    Good Luck

    ED

    Edited by Guest
  • Link to post
    Share on other sites
    Posted (edited) · Buying Used Ultimaker2

    Im still looking to buy another one now.

    Edited by Guest
  • Link to post
    Share on other sites
    Posted · Buying Used Ultimaker2

    Im still looking to buy another one now. Only from Europe will pay at most 1300 Euro.

     

    Warning about the warranty : https://ultimaker.com/en/community/39303-do-not-buy-a-used-ultimaker-within-the-warranty-period

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Startups, apply for the Forward AM Innovation Award!
        Are you a startup using 3D printing? Perhaps you should continue reading... 
         
        Together with BASF we are launching the Forward AM Innovation Award - the very first global contest for startups developing new applications with 3D printing!
         
        Why apply?
        The winning startup will receive €100,000 in goods and services*, along with coaching and marketing exposure from top-notch leaders in the industry.
         

         
        Who can apply?
        Your startup creates products using Additive Manufacturing, is less than 5 years old, and has less than 50 employees. We are looking for 3D printing applications with a strong focus on innovation, sustainability and scalability.
         
        Dental aligners, shoes, tools, automotive parts, music instruments, industrial tooling and molding, medical implants, sports equipment, toys, architecture, fashion, construction... all are welcome to join!
         
        Do you have an innovative, sustainable and scalable idea that leverages the unique possibilities of 3D printing? Then it is time to apply!
        More information can be found here.
         
        Applications close on March 28th, 2021
        * What does "in goods and services" mean?
        The winner will be able to pick any item from the overall product and service portfolio of the sponsors, e.g. printers, materials, consulting, software... Choose whatever you need to accelerate your startup.
         
          • Like
        • 0 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...