Jump to content
Ultimaker Community of 3D Printing Experts

Great solution for use of big spools (2.2 kg)


Recommended Posts

Posted · Great solution for use of big spools (2.2 kg)

Hello all,

I bought myself some big Colorfabb PLA spools (2.2kg) to use with my UM2+ ext.

But putting the spool on whatever spool holder you use, gives you this result :

wd2HDSx.jpg

You can use filament guides and other tricks but they all will cause friction. There is no way to get the filament directly in the filament feeder without guiding it around. (and causing friction)

So I worked together with Andreas from www.3dprinterstore24.de That's the one that came up with the doors and top covers for our Ultimaker I'm thankfully using every day. (here's a link to an old forum thread with pics of the cover and door)

Anyway, we came up with a great solution for every day use of big spools. I know you can put them on the ground etc etc but those are all no options for me because I have dogs that run around the house all day. :)

This big spool holder uses 4 bearings to cause minimal friction.

I personally LOVE IT.

Here are pictures of the prototype I'm using.

vKfPyQr.jpg

Bp3ZLwa.jpg

Gz5i7fR.jpg

KJhyDQy.jpg

a5nVdU1.jpg

this is the prototype :

JMd9n0w.png

I thought I'd share this with you people cause I'm probably not the only one using big spools. :)

cheers

Frederiek

  • Like 2
Link to post
Share on other sites

  • 1 month later...
Posted · Great solution for use of big spools (2.2 kg)

IMHO the spoolholder on the UM2+ is rather poor. Even some of the 1kg spools don't fit properly, the darn thing was squeaking and the filament ended up rubbing either against the spool or the feeder intake or both. With one type of spools (esun i think it was) the filament would get dragged off the spool and fall in the void between spool and the back wall.

I was not happy about all this.

Now, the big 2kg holder in frederiekpascals post was a bit overkill for me, but I ended up buying something similar to IRobertI's spool holder (Youmagine) ) at 3dprinterstore24.de and am very happy with it.

Bought it instead of printing IRobertIs mostly because I only have PLA and no bearings, rods, nuts or anything and the price seemed fair and I needed to order the UltiTop hood from them as well.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...