Jump to content
Ultimaker Community of 3D Printing Experts

Marlin configuration


guillaume.dolnet
 Share

Recommended Posts

Posted · Marlin configuration

Which is why I created the website, it builds Marlin as specific configurations you want. That's a lot easier then messing around with the Arduino stuff. It also adds a few files in the windows zip that help with installing the firmware. Or you can download the resulting HEX file and install it with Cura's "install custom firmware" option.

  • Link to post
    Share on other sites

    Posted · Marlin configuration

    Right, in cura, i open a custom firmware?

    Into MArlin V1 there are boot loaders 5 ones

    Which file i put?

  • Link to post
    Share on other sites

    Posted · Marlin configuration

    I try.

    Thank's for all Daid.

  • Link to post
    Share on other sites

    Posted · Marlin configuration

    anyone care to point out to him the melting point of PEEK?

  • Link to post
    Share on other sites

    Posted · Marlin configuration

    275C should be safe. And the V2 hotend transfers a bit less heat to the PEEK then the V1 hotend, giving you also a potential higher running temperature.

    But indeed a warning would be in place. Messing with your firmware could irreversible damage your machine.

  • Link to post
    Share on other sites

    Posted · Marlin configuration

    Hi,

    i am still learning ardiuno..

    For temperature, i modified all the extruder body. I believe in the end that i will also need 2 head because there is a cleaning problem with the PLA after ABS or PMMA. Few of it stays into the heater and make problems.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • The Ultimaker Showcase — October 14. What's new?
        Your dear friends at Ultimaker have some exciting news and insights for you!
         
        • 0 replies
      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
        • 8 replies
    ×
    ×
    • Create New...