Jump to content
Ultimaker Community of 3D Printing Experts

problème d'extrusion


Recommended Posts

Posted · problème d'extrusion

Bonjour

Je m'appelle Emna, j'utilise l'imprimante Ultimaker 2 pour la première fois. une collègue a utilisé la machine avant et elle a cru que la buse est bouchée. j'ai essayé la "atomic method" et ça était bien extrudé. mais lorsque j'essai de faire un essai d'impression. il y'a absolument rien.

j'ai réinitialisé l'imprimante et lorsque j'arrive a l'étape de la mise en place de filament, et surtout lorsque j'attends que le matériau apparaît dans la buse. rien n’apparaît.

Qu'est ce que je peux faire?

  • Link to post
    Share on other sites
    Posted · problème d'extrusion

    Hey Emna (I don't speak French, hope English is fine too),

    Look at the back of the printer, when you feed in new filament and try to extrude some - is the movement of the filament smooth or does the motor skip back? Maybe something got stuck in the feeder at the back and blocks the filament.

    Also make sure that the filament can unroll smoothly from the filament roll.

    • Like 1
    Link to post
    Share on other sites
    Posted · problème d'extrusion

    the movement is smooth and there is no skipping back. I can see it (the filament) arriving to the printing head. but there is no material in the nozzle!! I am wondering if it is related to the tempreture?

  • Link to post
    Share on other sites
    Posted · problème d'extrusion

    The temperature is important too. Depending on the filament type it should be at least above 180° - rather 210°.

    It is possible that the temperature sensor is not reporting correct values. This is not really easy to test (except if you have a thermometer handy with an external probe...).

  • Link to post
    Share on other sites
    Posted · problème d'extrusion

    You'll first have to identify where the filament is stuck. Take out the bowden tube at the head end and use "move material" in the maintenance menu on the printer to move filament. If you see that it moves smoothly, then you can exclude everything until up to the printhead as the source of the problem.

    Maybe the bowden tube was just not properly inserted into the head and filament got stuck between the gap.

    Also check that the 3rd. fan is working. If if doesn't there is a slight chance that the filament heats up on its way to the head and softens thus creating a plug and jamming.

  • Link to post
    Share on other sites
    Posted · problème d'extrusion

    Good Morning

    the filament is stuck in the feeder.

    the feeder makes a "tik tik " sound every timz I try to insert a material.

  • Link to post
    Share on other sites
    Posted · problème d'extrusion

    Does it advance past the feeder? If not then it is time to clean the feeder. There are four screws that hold it but be aware that you need to take the left motor cover (when looking from the front of the printer) in order to prevent the feeder motor from falling down when you remove the four screws.

  • Link to post
    Share on other sites
    Posted · problème d'extrusion

    I cleaned the feeder. but it was too tight so the filament could not pass through it.

  • Link to post
    Share on other sites
    Posted · problème d'extrusion

    The feeder has one white indicator on the right side. There is a screw at the top which you can use to change the tension on the feeder. If this is an older UM, the white indicator should be at the top (smallest tension).

  • Link to post
    Share on other sites
    Posted · problème d'extrusion

    I have loosen it.

    but the filament do not pass through the feeder.

    it seems like it is blocked.

  • Link to post
    Share on other sites
    Posted · problème d'extrusion

    Ok, then you need to take the feeder apart. It is not hard to do. Remove the left cover from the inside of the printer (it is held with two screws together). Then while holding the feeder motor, remove the four screws from the feeder. You can then take the feeder off the printer and disassemble it.

  • Link to post
    Share on other sites
    Posted · problème d'extrusion

    Okay now it works, but after printing some layers. the printed body starts moving. it is not fixed to the plate. Inpite of using the glue.

    taht is my new problem

  • Link to post
    Share on other sites
    Posted · problème d'extrusion

    Ok, I suggest you create a new thread about it.

    By the way, what was the reason the feeder was blocked?

  • Link to post
    Share on other sites
    Posted · problème d'extrusion

    there was a piece of filament inside the feeder. so I opened the feeder and cleaned it.

    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Startups, apply for the Forward AM Innovation Award!
        Are you a startup using 3D printing? Perhaps you should continue reading... 
         
        Together with BASF we are launching the Forward AM Innovation Award - the very first global contest for startups developing new applications with 3D printing!
         
        Why apply?
        The winning startup will receive €100,000 in goods and services*, along with coaching and marketing exposure from top-notch leaders in the industry.
         

         
        Who can apply?
        Your startup creates products using Additive Manufacturing, is less than 5 years old, and has less than 50 employees. We are looking for 3D printing applications with a strong focus on innovation, sustainability and scalability.
         
        Dental aligners, shoes, tools, automotive parts, music instruments, industrial tooling and molding, medical implants, sports equipment, toys, architecture, fashion, construction... all are welcome to join!
         
        Do you have an innovative, sustainable and scalable idea that leverages the unique possibilities of 3D printing? Then it is time to apply!
        More information can be found here.
         
        Applications close on March 28th, 2021
        * What does "in goods and services" mean?
        The winner will be able to pick any item from the overall product and service portfolio of the sponsors, e.g. printers, materials, consulting, software... Choose whatever you need to accelerate your startup.
         
          • Like
        • 0 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...