Jump to content
danilius

Toothbrush holder

Recommended Posts

Posted · Toothbrush holder

20160426_181958.thumb.jpg.007de2c015e3957163a3ed08827d5f04.jpg

You can download it from YouMagine here: https://www.youmagine.com/designs/toothy-toothbrush-holder

Printed in ABS without any shielding whatsoever. All I do is coat the bed in ABS juice, start printing at 75C and have the TweakAtZ plugin raise the temperature to 110C from the second layer onwards. That way I don't have to wait ages for the bed to warm up. I do use brims, usually 10 or 20 lines depending on the model. In this case I used 20 since the bed contact area is so small. I have printed a few of these, and they take 4 hours with a 0.8mm nozzle, 0.4mm layer height, 5% infill, and around 60mm/s, twice the time obviously at 0.2mm layer height.

If any of the moderators are reading this, I won't be using the 3D print upload form until:

1) I am not forced to enter anything, but get to choose what information I supply or don't. It's my model, my effort, and my time. When those requirements have changed and item 2 has been fixed, I will use it again.

2) I'm on Ubuntu 15.04 using Chrome. My pictures won't upload now to the 3D print form. Not having all the time in the world, I tried twice with the same result. So, I abandoned that effort, along with the considerations mentioned in item 1.

20160426_181958.thumb.jpg.007de2c015e3957163a3ed08827d5f04.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Survey: Understanding your workflow
      Interact with future concepts and aim to collect your feedback and opinion. In particular, if this would/could be a welcome addition to your 3D printing workflow. Interested?
      • 0 replies
    • Coronavirus: Let's do our part
      Through this post I would like to further explain what we are doing, and what you could be doing. 
      Our efforts consist of 2 layers. First; connect medical institutions and hospitals to (local) 3D Printing hubs to help them print parts of which a 3D model already exists. And second, contribute to design the necessary part and then have it printed via a (local) 3D printing hub. Experts are available from within Ultimaker and from within our network of 3D printing experts.
        • Like
      • 46 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!