Jump to content
Ultimaker Community of 3D Printing Experts
mchughmp

Guide: Printing PEEK (PolyEther Ether Ketone) on the UM2.

Recommended Posts

Hi All;

I got an UM2 printing PEEK well enough to complete my Masters research project.

I received great help and advice on these forums and hopefully posting the results here helps the community.

Here's a link to the system development:

https://drive.google.com/a/tcd.ie/file/d/0B5czN7u52TZnZEhUN0x4NWFtams/view

and here's a link to the whole masters:

https://drive.google.com/a/tcd.ie/file/d/0B5czN7u52TZnWE1vRlBPSFEwWGM/view

Thanks to everyone who gave me help and advice here.

I also helped set up a Rapid Prototyping lab with 5 UM2s during my final year for students to use freely; was a great success, good little printers!

Mike

Edited by Guest
  • Like 2

Share this post


Link to post
Share on other sites
On 6/9/2016 at 11:10 AM, mchughmp said:

Hi All;

I got an UM2 printing PEEK well enough to complete my Masters research project.

I received great help and advice on these forums and hopefully posting the results here helps the community.

Here's a link to the system development:

https://drive.google.com/a/tcd.ie/file/d/0B5czN7u52TZnZEhUN0x4NWFtams/view

and here's a link to the whole masters:

https://drive.google.com/a/tcd.ie/file/d/0B5czN7u52TZnWE1vRlBPSFEwWGM/view

Thanks to everyone who gave me help and advice here.

I also helped set up a Rapid Prototyping lab with 5 UM2s during my final year for students to use freely; was a great success, good little printers!

Mike

 

mchughmp, Thank you for being so active on this platform. I am not able to access your google drive. Are these documents posted somewhere else?

 

Congratulations on your masters!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 86 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!