Jump to content
Ultimaker Community of 3D Printing Experts

UM2 hotend 9.4mm & 8.4mm adjustable spacer


Recommended Posts

Posted · UM2 hotend 9.4mm & 8.4mm adjustable spacer

It's untested because I have a long weekend ahead. But it should just work. It has two positions 8.4mm distance and the other 9.4mm distance. I printed it on PLA-tec. Also on 9.4mm distance you can see through if the Bowden it's on.

https://www.youmagine.com/designs/ultimaker-2-9-4-8-4mm-spacer

spacer.thumb.jpg.31b0672b66006ed07e54218f67aec1e2.jpg

spacer2.thumb.jpg.26b91de981fcb3785e394243bc1a3f56.jpg

Printed on black PLA-tec (110-120 heat resistant) using window cleaner + 1 hairspray puff before heating the bed for adhesion. 0.1 layers 50mm/s fans full at layer 30ish.

spacer.thumb.jpg.31b0672b66006ed07e54218f67aec1e2.jpg

spacer2.thumb.jpg.26b91de981fcb3785e394243bc1a3f56.jpg

  • Link to post
    Share on other sites
    Posted · UM2 hotend 9.4mm & 8.4mm adjustable spacer

    If you use the i2k 1mm you need a different spacer if you want to keep the nozzle on the same height/not touching the metalfancap.

    Also if you play with the coupler or want to use two different heights (dual?) without using a spring, then this helps (not my design but the one from anders).

  • Link to post
    Share on other sites

    Archived

    This topic is now archived and is closed to further replies.

    ×
    ×
    • Create New...