Jump to content

PLA zu flüssig während des Drucks?


plc

Recommended Posts

Posted · PLA zu flüssig während des Drucks?

Hallo zusammen,

ich habe ein Problem und als Laie bisher schon viele Tipps hier gefunden und hoffe nun auch auf fachkundige Hilfe oder Ideen :-)

Zur Veranschaulichung 3 Bilder.

Bild 1 zeigt ein perfekt gedrucktes Kirchendach, so ging das lange Zeit.

Jetzt plötzlich ist es fast so, als würde das PLA verlaufen, sobald es ans Dach geht. Das Ergebnis sieht man auf Bild 2. Bild 3 zeigt einen abgebrochenen Druck, hier sieht man deutlich, dass das Problem auch schon wieder auftaucht.

Ich drucke mit PLA, 210° (habe auch schon 195° probiert), 100% Flow, 0% Fan (habe auch schon 100% probiert). Alles brachte keine Lösung für das Problem. Und ich bin mir nicht bewusst, sonst eine andere Einstellung verändert zu haben.

Woran kann das liegen? Hat jemand einen Rat?

domdach3.thumb.JPG.b820fa2bbf633339122d90083113363b.JPG

DOM_Dach.thumb.JPG.02ea25e108468d98df319c5185ada838.JPG

Domdach2.thumb.JPG.0284ac16e06dd5210f68f231533b2aed.JPG

domdach3.thumb.JPG.b820fa2bbf633339122d90083113363b.JPG

DOM_Dach.thumb.JPG.02ea25e108468d98df319c5185ada838.JPG

Domdach2.thumb.JPG.0284ac16e06dd5210f68f231533b2aed.JPG

  • Link to post
    Share on other sites

    Posted · PLA zu flüssig während des Drucks?

    PLA auf jeden Fall nach den ersten paar Schichten mit Fan drucken, das muss gekühlt werden. Ich nutze 0% nur für die allererste Schicht bei PLA ab der 5. Schicht dann 100%. Da kann man sich nun streiten, ob erst nach der x Schichten und ob nicht auch 75% reicht, aber 0% mit PLA ist meiner Erfahrung nach nix und dann kommt sowas bei rum.

    Welchen Drucker benutzt Du? Funktionieren die Lüfter überhaupt? UM2/UM2+ haben 3 Lüfter am Druckkopf, einer hinten, der zur Rückwand zeigt und eigentlich während des Druckens immer laufen sollte und dann die 2 seitlichen zur Kühlung des gedruckten Teils.

    In meinem Slicer gibt es die Möglichkeit, die Geschwindigkeit zu verringern, damit eine Mindest-Zeit pro Schicht nicht unterschritten wird, Sinn davon ist es, dem frisch Gedruckten Zeit zu geben, etwas abzukühlen, bevor die nächste Schicht drauf gesetzt wird. Das würde ich also auch einschalten - gibts bestimmt bei Cura auch.

    Hoffe das hilft etwas weiter

  • Link to post
    Share on other sites

    Posted (edited) · PLA zu flüssig während des Drucks?

    Danke für deine Antwort.

    Ich nutze den UM2

    Die Lüfter funktionieren alle 3. Der Hintere läuft von Anfang an, die seitlichen, wenn ich Fan anschalte.

    Ich drucke Momentan mit einer Geschwindigkeit von 50mm/s. Ist das zu schnell? Die Spitzen macht er damit dann ja wieder ganz passabel.

    Es gibt bei Cura die Einstellung, Minimum time spent in a layer, give the layer time to cool out. Das steht bei 10sec. Allerdings verstehe ich das nicht ganz, da jede Schicht auf jeden Fall schneller als in 10 sec gedruckt wird...

    Edited by Guest
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
        • 0 replies
    ×
    ×
    • Create New...