Jump to content
randomdude583

prints coming out with strange holes

Recommended Posts

Posted · prints coming out with strange holes

Im using a homebuild ORD Hadron printer with Cura 15.04.6 i recently updated, and ever since the prints have been coming out badly. I have absolutely no clue what happened as i hadn't changed settings before it broke. im including photos of what the prints look like.IMG_20160705_212427.thumb.jpg.89845b10af535e5e23e714b59debb814.jpg

IMG_20160705_212427.thumb.jpg.89845b10af535e5e23e714b59debb814.jpg

Share this post


Link to post
Share on other sites
Posted · prints coming out with strange holes

Hi and welcome,

That looks like massive underextrusion, are you sure it's related to the slicer? Does an older gcode with your previous version do the same? It might be related to hardware

Share this post


Link to post
Share on other sites
Posted · prints coming out with strange holes

Oh Thank goodness, I thought I was the only 1 to have this problem. It has been a massive ball ache since I updated as well. Before I had no problems with PLA. Only had problems with the Formfutura Brass filled one. But now it is with all my filaments.

Share this post


Link to post
Share on other sites
Posted · prints coming out with strange holes

Why yes, I am!! :) The pic you posted has dramatic underextrusion, can you see light through the nozzle after atomic pulls?

Share this post


Link to post
Share on other sites
Posted · prints coming out with strange holes

Turns out its your filament diameter, you gotta make sure to update that value in Cura or it will fail this way. it works much better now that I changed it

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 96 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!