Ultimaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
I have found out the problem and it is due to the firmware. Need to get the firmware from source/github/Ultimaker/marlin and modify the define file. Configuration.h has changed as some of the things have been moved to Configuration_adv.h. Make sure the defines like BED_LIMIT_SWITCH is uncommented as well as TEMP_SENSOR_BED set to 1 or 6 depending on thermistor type. Normally 1 is good enough for most 100k thermistor. Use Arduino IDE to compile and upload the firmware to the Ultimaker.
We don't often release an alpha version of Ultimaker Cura... So what's different this time? This Alpha contains such a huge slicing engine overhaul that we really need your help!
We wish to celebrate and honor the innovators that push forward the field, technology and world. We opted to not present it as a competition or ranked list. Every innovator has earned his spot on that list in their own way. We also look at the 3D printing industry as a whole and not limit the list to those only using Ultimaker.
Recommended Posts
magicxman 0
I have found out the problem and it is due to the firmware. Need to get the firmware from source/github/Ultimaker/marlin and modify the define file. Configuration.h has changed as some of the things have been moved to Configuration_adv.h. Make sure the defines like BED_LIMIT_SWITCH is uncommented as well as TEMP_SENSOR_BED set to 1 or 6 depending on thermistor type. Normally 1 is good enough for most 100k thermistor. Use Arduino IDE to compile and upload the firmware to the Ultimaker.
Link to post
Share on other sites