Jump to content
Ultimaker Community of 3D Printing Experts
kenjo

cura 2.1. autoscale. Total time/money waste.

Recommended Posts

I just wasted 15 hours and a lot of plastic on the autoscale feature. namely I did not notice that it did scale the STL file and printed it.

Now the feature is possible to turn off but I would like to know in what situation do this option EVER need to be on ??

Having it on can result in really bad result as I just experienced can anything equally bad happen if it is not ON ??

That is I would really really like to see that option not existing at all as this problem is going to happen to more people than me. If the model is to large put up a dialog or something asking if it should be scaled but do not do it automatically.

  • Like 1

Share this post


Link to post
Share on other sites

Well clearly we all understand what scaling a model does.

It's doing it automatically that make no sense. Of everything I printed only a very few could actually be scaled. Most of the thing I print needs to be the size its designed to be and changing it is just going to make the whole thing useless.

If the thing do not fit ask the user don't just assume it's ok to scale. Its to easy to miss that this scaling happens and the result is WAY worse than having a model that can not be sliced until the user scales it to fit.

I see no reason to retain this feature, just always ask the user.

  • Like 1

Share this post


Link to post
Share on other sites

This a backwards feature and also costed me lot of material and time :(, especially if you, like me, print objects at the edge of the largest sizes possible to print.

I can understand the developers want to dumb down the interface, but this is just a nasty auto feature,

and it does need a click to continue popup to say it was auto-scaled for your "convenience"

(I never saw the popup because it takes some time to load my large files, and I flip to other work until it is loaded)

Edited by Guest

Share this post


Link to post
Share on other sites

I agree, I missed the pop-up as well and it scaled my model maybe 5%-6%, enough for me not to notice while printing but when I assembled I thought I got my model wrong. Spent 20 hrs printing, and a few more trying to trouble shoot my tolerances which had no issue :/ Only noticed during assembly of the full thing.

I don't think autoscale does anyone any favors, the fact that the object turns grey when unsaleable is enough to prompt people to scale their objects down in the direction they choose or re-design.

  • Like 1

Share this post


Link to post
Share on other sites

I just went through the very same thing. I'm some angry too.

I did a 8 hour print and went to do another part in Cura and just noticed that sly pop up that it had auto scaled to 92% No way to disable this "feature" from what i can see.

So now I have started a new print..... 9.5 hours (done 100% scale this time)

Why create new "features" with no way to undo them?

A lot of filament and time gone to waste.

Share this post


Link to post
Share on other sites

It can easily be disabled in the general preferences ("Scale large files"). But I fully agree, it shouldn't be enabled by default and even if manually enabled it should be VERY obvious if it has come into effect.

Personally I would also prefer if it wasn't a feature at all because it doesn't really add anything, and it can really screw things up.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Introducing Ultimaker Cura 3.6 | Beta
      Ultimaker Cura 3.6 | Beta is available. It comes with new features, bug fixes, and UX improvements. We would really like to have your feedback on it to make our stable release as good as it can be. As always, you can download the beta for free from our website, for Windows, MacOS, and Linux.
        • Like
      • 82 replies
    • Print Core CC | Red for Ruby
      Q: For some users, abrasive materials may be a new subject matter. Can you explain what it is that makes a material abrasive when you are not sure which print core to use?
      A: Materials which are hard in a solid piece (like metals, ceramics and carbon fibers) will generally also wear down the nozzle. In general one should assume...
        • Like
      • 30 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!