Jump to content
Ultimaker Community of 3D Printing Experts
Eka

Cura 15.04.6 In layers view model, outer wall somewhere is green

Recommended Posts

Hey guys, I have a question in Cura 15.04.6.

In layers view model, outer wall is red color, inner wall is green color.

But I got inner wall color at where was suppose to be outer wall.

and the print seemed to get a additional layer wall in green color place.

1.thumb.png.45dc14ea8d2685c4295a09792a5f1f2e.png

After I had got rid of the four sticks at the corners, it became normal.

2.thumb.png.096627c33291e13a101887b72d3a0a43.png

Could you tell me what happened??

Thanks a lot, everyone.

One more question, Where is bed temperature setting in Cura 15.04.6?

It disappeared with the update.

1.thumb.png.45dc14ea8d2685c4295a09792a5f1f2e.png

2.thumb.png.096627c33291e13a101887b72d3a0a43.png

Share this post


Link to post
Share on other sites

Have you tried checking it with X-Ray view? The model might have 3D printing errors. Run it through one of the repair services to make sure it's printable. I would suggest that you try https://makeprintable.com/, it's free and automatic. Another option is to check it with meshlab.

 

reemaj3D, Thanks for your suggestion, :D

it looked fine in cura X-Ray view, makeprintable and netfabb.

2.thumb.png.15778f39ef83b82f4249f5a94261296a.png

3.thumb.png.2061655d0b13a7921b35ebbb739dcf19.png

4.thumb.png.5ff4db8a04372e7dc286d643975ee778.png

I'm not sure how to use meshlab, but it looked fine, too.

5.thumb.png.0c35d1f7fe34e6f1b60f10154ef75e79.png

But in cura layers view, still......

1.thumb.png.8553b20fd1671b7e363a59294d2978ec.png

Thanks~ maybe just cura error

2.thumb.png.15778f39ef83b82f4249f5a94261296a.png

3.thumb.png.2061655d0b13a7921b35ebbb739dcf19.png

4.thumb.png.5ff4db8a04372e7dc286d643975ee778.png

5.thumb.png.0c35d1f7fe34e6f1b60f10154ef75e79.png

1.thumb.png.8553b20fd1671b7e363a59294d2978ec.png

Share this post


Link to post
Share on other sites

Those may be 'reversed faces'. Green colors indicate an inside facing wall.

Reverse faces in Sketchup show up in dark grey. In Meshmixer they show up as striped pink/red faces.

Not sure how other 3d modeling problems show that.

Most times it does not affect the print, Cura can compensate, but you might want to check/fix it anyway.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Taking Advantage of DfAM
      This is a statement that’s often made about AM/3DP. I'll focus on the way DfAM can take advantage of some of the unique capabilities that AM and 3DP have to offer. I personally think that the use of AM/3DP for light-weighting is one of it’s most exciting possibilities and one that could play a key part in the sustainability of design and manufacturing in the future.
        • Like
      • 3 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!