Jump to content
Ultimaker Community of 3D Printing Experts

Why is Cura using so much data upload ?


Recommended Posts

Posted · Why is Cura using so much data upload ?

Due to my location I can only get wireless broadband with a very meagre data allowance. I have noticed a huge increase in data usage when I use Cura. I checked the network activity/traffic and CuraEngine.exe is uploading heaps of data to somewhere.

Checking a bit further I found that whenever I load a file on the platform, it sends of about 10 as much data as the size of the actual file. This got ridiculous the other day when I was loading multiple small items on the platform. In no time at all I saw 500MB of my data allowance disappear - all attributed to CuraEngine.exe I am limited to 15GB a month - that's less than 500Mb a day, so this has become a major problem for me.

Why is it doing it , where is it going, what is it being collected for, and how to I stop it? If I block or disconnect the internet while I'm using Cura, that doesn't seem to help either because even if I then switch Cura off when I've finished, and then connect the internet back up again, it seems as it it has been buffered and then sends all the data.

Using latest version of Cura 2.1 but I think it also does in on 15.04.5 .. There is a Setting in General "send anonymous print information" and this switched off.

  • Link to post
    Share on other sites
    Posted · Why is Cura using so much data upload ?

    CuraEngine isn't uploading any data to the interwebs. It's sending data through a local socket to the front end. Your operating system might (incorrectly) see this as network traffic.

    The flow is as follows;

    1. Cura frontend sends model data to the backend.

    2. Backend does a bunch of slicing

    3. Backend sends sliced polygons back for visualisation

    4. Backend sends g-code back for saving.

    Every time you change a setting and wait a bit, this process is repeated.

    The anonymous print information is only sent when a file is written to disk / file sent to usb/ etc (so not every slice). At that point it only sends the values of your settings, your operating system, some info on your processor and a hash of the model. All of which are extremely small.

    The only data that we ever send to the interwebs is the print data and that is extremely little. Refreshing the ultimaker page will have a greater impact.

  • Link to post
    Share on other sites
    Posted · Why is Cura using so much data upload ?

    Thanks for the explanation guys. That is a great relief to know! :)

    I was monitoring network traffic using a feature of Kaspersky, Obviously it is incorrectly reporting it (or maybe I'm incorrectly interpreting what it's showing me).

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Startups, apply for the Forward AM Innovation Award!
        Are you a startup using 3D printing? Perhaps you should continue reading... 
         
        Together with BASF we are launching the Forward AM Innovation Award - the very first global contest for startups developing new applications with 3D printing!
         
        Why apply?
        The winning startup will receive €100,000 in goods and services*, along with coaching and marketing exposure from top-notch leaders in the industry.
         

         
        Who can apply?
        Your startup creates products using Additive Manufacturing, is less than 5 years old, and has less than 50 employees. We are looking for 3D printing applications with a strong focus on innovation, sustainability and scalability.
         
        Dental aligners, shoes, tools, automotive parts, music instruments, industrial tooling and molding, medical implants, sports equipment, toys, architecture, fashion, construction... all are welcome to join!
         
        Do you have an innovative, sustainable and scalable idea that leverages the unique possibilities of 3D printing? Then it is time to apply!
        More information can be found here.
         
        Applications close on March 28th, 2021
        * What does "in goods and services" mean?
        The winner will be able to pick any item from the overall product and service portfolio of the sponsors, e.g. printers, materials, consulting, software... Choose whatever you need to accelerate your startup.
         
        • 0 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
        • 0 replies
    ×
    ×
    • Create New...