Jump to content
Ultimaker Community of 3D Printing Experts

different problems and different prints.


paul9

Recommended Posts

Posted · different problems and different prints.

I made the prints with PLA using the default settings the only difference is that in one of the cooling fans were lit while the other had gone out.

Because in the one with lighted fans who came better in the end when printed antennas there was too much material and came evil?um2.thumb.jpg.74f413ae03723e115adbb7d10e62091b.jpg

um2.thumb.jpg.74f413ae03723e115adbb7d10e62091b.jpg

  • Link to post
    Share on other sites

    Archived

    This topic is now archived and is closed to further replies.

    ×
    ×
    • Create New...