Jump to content
Objectprint

Y axis problem on Ultimaker 2+

Recommended Posts

Posted · Y axis problem on Ultimaker 2+

Good afternoon to you all,

So let me introduce my problem.

A few weeks ago, we did a firmware update for our UM2+. Since that date, all the problems started to arrive.

For every print and even buildplate calibrate, the dimensions of the Y axis are divided by two. The X and Z are ok for the dimensions and speed.

The printer used the same quantity of material as if the Y axis were "full scale", the part is all squeezed in the Y direction.

So after checking the web, i did severals things:

- Check all the belts and pulleys, and tightened everything.

- Check all the plugs connected to the electronic board

- Modify the set-up of Cura for this printer (mainly the size of the table in Y direction)

- Put all the firmware for UM2+ started with 14.04 until the last one

- I did not made any change to the firmware using Marlin or Arduino

Despite all those check-up, i still have my problem.

And the LED is not working, but this my least problem.

Actually, i am really stuck and i don't know what to do.

If someone can help me, it will be great.

Thank you

Share this post


Link to post
Share on other sites
Posted · Y axis problem on Ultimaker 2+

Are you 100% sure that you did choose the correct firmware?

Cura 14.04 doesn't have Firmware for UM2+

Share this post


Link to post
Share on other sites
Posted · Y axis problem on Ultimaker 2+

Hello,

I take Cura 14.04, and the option update firmware for UM2+ was available. So i thought it was ok.

Otherwise, i try to change firmware from 14.04 up to the last one (Cura 2.1 and something).

Share this post


Link to post
Share on other sites
Posted · Y axis problem on Ultimaker 2+

i think he means 15.04..

after a firmware update, i would always do a complete factory reset.. it will clear any wrong eeprom settings. can you do a factory reset and let us know if this resolves it?

  • Like 1

Share this post


Link to post
Share on other sites
Posted (edited) · Y axis problem on Ultimaker 2+

I just did the update with cura 2.3Beta, and then a factory reset.

And no change with my problem.

Small update: after using Printrun, i managed to modify the M92 line (for step unit on each axis). And now everything to works, UM2+ is printing a test part and everything seems ok.

Thanks for your help

Edited by Guest

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 98 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!