Jump to content
Ultimaker Community of 3D Printing Experts

slowmo since extruder upgrade


Recommended Posts

Posted (edited) · slowmo since extruder upgrade

hi

UM original (without plus) extruder upgrade to bondtech QR failed. After upgrading we added the settings into the start-gcode section in cura, everything started working in slowmo. Means that the head moves around 1mm/min.

Unfortunately the same with Z and E :-(

Of course we went back to the original extruder but, well, the slowmo problem still appears.

What we tried yet:

- flashed the fw about 5 times with the original one coming from cura 1.5

- removed ulticontroller and tried printing over usb

Sadly nothing helped out. Any ideas if we f.... up the controller ?

thx

Edited by Guest
  • Link to post
    Share on other sites
    Posted · slowmo since extruder upgrade

    Somebody else needs to pitch in as I really don't know about the UMO, but on the UM2 the e-steps stay the same if you flash to a new firmware, except when you do a factory reset. So my guess is you messed up the e-steps settings, but you should be easily be able to change them back (again by g-code). On the UM2 is easy, you just do it by using tinkergnomes firmeware.

    Anybody able to tell the correct UMO esteps?

  • Link to post
    Share on other sites
    Posted · slowmo since extruder upgrade

    He can do a restore factory settings, I don't remember the name of the option...

    Anyway always back to source, on github marlin for the original says:

    #define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200.0*8/3,760*1.1} // default steps per unit for Ultimaker

    So 78.7402 for x/y 200.0 * 8?? For z (weird number...) and 760*1.1 for esteps

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...