Jump to content
Ultimaker Community of 3D Printing Experts

Different printing plates


Recommended Posts

Posted · Different printing plates

Hello guys!

Can any of you explain to me what solution is best?

What use you and how you are?

Lacquer on hot dish is what I use, but I've seen that too many people who do not use it anymore!

Second Buildtak solution (I do not know how it works)

Third solution (blue plate)

Fourth solution (brown plate)

azzurra.thumb.jpg.e6c6a453fc4352a10c28e55239c0bbcc.jpg

buildtak.jpg.60c00974948c785bd4a33485d52280dd.jpg

DSCN0543B.thumb.JPG.3ebcc379a805c89749992fd63a886f91.JPG

azzurra.thumb.jpg.e6c6a453fc4352a10c28e55239c0bbcc.jpg

buildtak.jpg.60c00974948c785bd4a33485d52280dd.jpg

DSCN0543B.thumb.JPG.3ebcc379a805c89749992fd63a886f91.JPG

  • Link to post
    Share on other sites
    Posted · Different printing plates

    It will depend on the materials you use, and if your printer has a heated bed or not.

    - For PLA you can just wipe the glass plate with salt water, and print on that, with the bed heated to 60°C. Thus absolutely requires a heated glass bed, it does not work on a cold bed.

    - For any other material, you could try gr5's method: wipe the glass plate with dilluted Elmer's wood glue (1 part glue in 10 parts water if I remember well), and let that dry in a thin layer.

    - I have also heard good comments on 3DLAC spray.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...