Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · Carbon filaments

Has any body used Carbon loaded filaments such as 3DXTECH 3DXNano ESD ABS+CNT.

I find that when printing a 108 mm model with a 15 mm raft, half of the raft breaks up

(the left side). Smaller models are ok (up to 50 mm)

The first layer is ok it is the next layers that cause the problem.

The raft looks like it has been plucked creating lumps of ABS that interfere with the print.

Anybody have any ideas to stop this?

Phil

  • Link to post
    Share on other sites
    Posted · Carbon filaments

    I'm guessing you have bad layer adhesion. Are the side fans on? You want them on the absolute minimum fan speed for ABS. Somewhere around 20%? You want them to spin and if you go too low they won't spin so figure out the absolute minimum for your fans and then increase by a few %.

    The problem (my guess in this case - picture wasn't super helpful and looks fine) is that ABS needs to be much hotter when the second layer comes down or the new layer doesn't melt the layer below and they don't bond well.

  • Link to post
    Share on other sites
    Posted · Carbon filaments

    Bottom layer fans off is the default in cura. But you need it for pla overhangs (for abs you want the tiniest bit of fan for overhangs - so I like around 20% fan - assuming 20% is enough to get your fan to spin - for some printers maybe not).

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • 24 Visiting our virtual showroom

      1. 1. Have you visited our virtual showroom before?


        • Yes
        • No
      2. 2. If yes - what content did you find most interesting?


        • Information about Ultimaker ecosystem
        • Applications & application stories
        • Customer success stories
        • Webinar sessions
        • Material wall & ecosystem partners
        • New product introduction; software subscription plans
      3. 3. What of the below would make you consider visiting (again)?


        • New Live Ultimaker Webinar streams
        • ‘Ask Me Anything’ with industry experts or Ultimaker staff via main stage and public chat
        • New customer success stories
        • New applications
        • Presentations/news from ecosystem partners
        • Opportunity to meet representatives for an interactive tour
        • Helpful videos like Software tutorials
        • Other; leave input in a comment below!

    • Our picks

      • Ultimaker turns 10: A look back
        Ultimaker is turning 10 years old and that means it is story telling time! We'll explore 2010-2014, traveling through the evolution of the business from the Protobox and Ultimaker Original, to the major leaps forward with the Ultimaker 2 and Ultimaker 3.
          • Like
        • 0 replies
      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...