Jump to content
Ultimaker Community of 3D Printing Experts

Serious Bug in Ultimate software?


Recommended Posts

Posted (edited) · Serious Bug in Ultimate software?

Is the following behavior of the Ultimate software (firmware) a Bug or my fault?

I had an sd-card in my Ultimate 2+,  which was printing from this card.

My UM is, by usb, connected to my computer which was not running.

By starting my computer the running UM restarted, interrupting and thereby ruining my print (the print process could not be resumed so I could throw away 5 hours printing).

This turned out to be a structural behavior of my Computer- UM combination.

Can anyone explain this or suggest a workaround?

(Other than disconnecting the UM before starting a print?)

PS

This turned out to be a structural behavior of my Computer- UM combination after restarting COMPUTER AND CURA

Edited by Guest
  • Link to post
    Share on other sites
    Posted · Serious Bug in Ultimate software?

    Is the following behavior of the Ultimate software (firmware) a Bug or my fault?

    AFAIK neither ... nor - it's the intended behavior.

    The new Cura automatically connects to the printer, if it is wired via usb. And the Arduino board resets itself as soon as it detects a serial connection.

    You don't need the usb connection if you print from sd card. The solution is indeed: remove the cable.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 6 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...