Questions about Ultimaker 3

[peteruithoven 4]

Thanks guys! I did already tried adding 'http://', but that didn't help. But adding the slash before the query fixes it.

So in my case this url works: 'http://10.0.0.106:8080/?action=stream'

[hstaub 0]

Got it

thanks

[Peter_Ravnsbaek 0]

On 10/24/2016 at 7:08 PM, nallath said:

We could have added a different camera, but it would have increased the price even more. Besides that, we use a pretty standard camera port, so upgrading it shouldn't be that big of an issue right

@nallath 

Do we need a special kind of camera? I just tried using the front port of our UM3E and i didn't have any luck.

 

Also. Is this possible to do on the new UM2+ connect.. We are really interested in adding a camera to them some how 

[nallath 1,120]

Uh. I really don't know. As far as camera's go for the UM3, you will probably also have to do some software setup to get that working. Especially if you also want the system to recognize the right one.

 

[Peter_Ravnsbaek 0]

Alright, I might just go with the mirror solution on the UM3 then. But what about on the new UM2 connect? 
The WLAN capability on a 3D printer is not really worth much without a camera to monitor first layer adhesion and all.