Jump to content
Ultimaker Community of 3D Printing Experts

prints not coming out right?


rainlei

Recommended Posts

Posted · prints not coming out right?

so im trying to print this 'coin' but it keeps messing up the edges, the shape is a basic cylinder with a simple clean cut out in the middle.

norm.thumb.PNG.3fd7986181bdfc0038315d013fb936ef.PNG

norm2.thumb.PNG.cf7e36d1656b1fea110fbeea302348db.PNG

norm3.PNG.f6205181ab031c4e1796b21989c49db2.PNG

but it keeps coming out like this

14795731_1079349655447610_861060007_o.thumb.jpg.4658e5d0ed6703c5fca98a6a7b52305b.jpg

14795836_1079349662114276_1132379539_o.thumb.jpg.6d772dda91bc6f047af1155e1a76d046.jpg

14808103_1079349642114278_137565732_o.thumb.jpg.6251ae692a9aff334f57898881e05ffd.jpg

14813007_1079349688780940_142909115_o.thumb.jpg.32ecbda21a6b5e2b4063360ef6e78414.jpg

any help in fixing the edges and bottoms would be appreciated!

norm.thumb.PNG.3fd7986181bdfc0038315d013fb936ef.PNG

norm2.thumb.PNG.cf7e36d1656b1fea110fbeea302348db.PNG

norm3.PNG.f6205181ab031c4e1796b21989c49db2.PNG

14795731_1079349655447610_861060007_o.thumb.jpg.4658e5d0ed6703c5fca98a6a7b52305b.jpg

14795836_1079349662114276_1132379539_o.thumb.jpg.6d772dda91bc6f047af1155e1a76d046.jpg

14808103_1079349642114278_137565732_o.thumb.jpg.6251ae692a9aff334f57898881e05ffd.jpg

14813007_1079349688780940_142909115_o.thumb.jpg.32ecbda21a6b5e2b4063360ef6e78414.jpg

  • Link to post
    Share on other sites
    Posted · prints not coming out right?

    can you share more information about what printer/slicer you use and the material settings like material, temp., speed, layer height...etc.?

    What is the bottom part of the print? small or wide?

  • Link to post
    Share on other sites
    Posted · prints not coming out right?

    can you share more information about what printer/slicer you use and the material settings like material, temp., speed, layer height...etc.?

    What is the bottom part of the print? small or wide?

     

    set1.thumb.PNG.5212c3a8b1912c77e115c2b674c23f85.PNG

    set2.PNG.87b5b66b33ff19589fe5c48effff61c2.PNG

    set3.PNG.602d7b4cbccf3cc2396d0ff1ce0f05ea.PNG

    the bottom is narrower then the top even though its spoused to be even.

    i have also tried every type of base, raft, brim, and skirt.

    also tried layer height of 0.06 which is default.

    set1.thumb.PNG.5212c3a8b1912c77e115c2b674c23f85.PNG

    set2.PNG.87b5b66b33ff19589fe5c48effff61c2.PNG

    set3.PNG.602d7b4cbccf3cc2396d0ff1ce0f05ea.PNG

  • Link to post
    Share on other sites

    Archived

    This topic is now archived and is closed to further replies.

    ×
    ×
    • Create New...