Jump to content
Ultimaker Community of 3D Printing Experts

need to buy a battery backup but not sure what specs?


Recommended Posts

Posted · need to buy a battery backup but not sure what specs?

Hi, I need to buy a battery backup for my UM2 Extended+ but haven't been able to find the specification of the machine. The link is broken in the support site. Does anyone know what spces should the battery backup have? Many thanks.

  • Link to post
    Share on other sites
    Posted · need to buy a battery backup but not sure what specs?

    I'm not the right person to answer that question as I have no experience with that type of setup. But, those that do will probably also want to know for how long the printer needs to be able to run without power?

  • Link to post
    Share on other sites
    Posted · need to buy a battery backup but not sure what specs?

    Do bear in mind, most low end UPS' have a changeover time. I've measured this across a few units with an oscilloscope and have found that the nasty "modified sine wave" (square wave to you and me) doesn't properly kick in for 15ms in some cases.

    If you really have a concern about this, look up a "duel conversion" UPS. They are always outputting from their inverter (and most output a proper sine wave). So when there's a blackout or brownout, the supply is never lost.

    Then it's just a case of sizing one for your printer.

    CJ

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 7 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...