[[Template core/front/global/favico is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] Jump to content
Ultimaker Community of 3D Printing Experts

Taulman 910 delaminating


mouse1010

Recommended Posts

Posted · Taulman 910 delaminating

I have an ultimaker original + with the hot end and extruder from the 2+ and I have been having all of my nylon prints delaminate on me. I normally print with the nozzle at 245 and the bed at 45 with my ultimaker 2 and it works great but I can not get any good prints out of my original +. My current settings ate a .1mm layer height, 40mm/s 100% infill, and 100% flow. I have tried hot end temperatures between 245 and 255 and print bed temperatures from 45 to 65 with no luck. I have made sure that the nylon is completely dry and blocking of the sides and front of the ultimaker original with no luck. Any help would be appreciated.

  • Link to post
    Share on other sites
    • 4 weeks later...

    Archived

    This topic is now archived and is closed to further replies.

    ×
    ×
    • Create New...