Jump to content
Ultimaker Community of 3D Printing Experts

FS: Fully-Assembled Ultimaker in US


Recommended Posts

Posted · FS: Fully-Assembled Ultimaker in US

For sale is a fully assembled Ultimaker, it was bought almost exactly a year ago and assembled by us for use in making prototype parts for an upcoming product. We've since decided on a wood CNC design and thus are selling the Ultimaker. We did make a few test prints and prototype parts so can confirm the machine is working properly. I did find the feed mechanism to be a bit fiddly so we purchased the new 'hot-end v2' upgrade but have not yet installed it so that will be included as well. In addition to the Ultimaker and the hot-end upgrade i have 1 spool of ABS plastic and 1 spool of PLA plastic (both 'natural' color) plus about 1/2 a spool of black PLA which i'll include to get you started.

Buying all this new in the USA would cost roughly $1900 (1575 for the Ultimaker, $75 for the v2 Hot end upgrade, $75 for plastics plus $190 shipping from the Netherlands). And then you'd still have to put it all together, which was a pretty daunting task.

Asking $950 for everything (ie. roughly half of what it would cost new) plus shipping or I'd meet you for personal delivery within 2 hr drive of Washington DC.

Thanks,

Steve

http://www.shbobo.net

 

  • Share this post


    Link to post
    Share on other sites
    Posted · FS: Fully-Assembled Ultimaker in US

    Hi Steve,

    If this hasn't sold already, please call/text me at 412 five 4 zero 50 five 0. I can meet near the University of Maryland (College Park, MD).

    Thanks,

    Michael

  • Share this post


    Link to post
    Share on other sites
    Posted · FS: Fully-Assembled Ultimaker in US

    I will take the Ultimaker if it is available. Please send me an email jpburgelin - at - gmail.com or text/call my mobile at SIX ONE EIGHT 406 5299

  • Share this post


    Link to post
    Share on other sites
    Posted · FS: Fully-Assembled Ultimaker in US

    Not sure if the seller is still checking the forum, but this has been sold.

  • Share this post


    Link to post
    Share on other sites
    Posted · FS: Fully-Assembled Ultimaker in US

    Sorry, I haven't been on the forum in a few days but yes the printer has been sold.

  • Share this post


    Link to post
    Share on other sites
    Posted · FS: Fully-Assembled Ultimaker in US

    For sale is a fully assembled Ultimaker, it was bought almost exactly a year ago and assembled by us for use in making prototype parts for an upcoming product. We've since decided on a wood CNC design and thus are selling the Ultimaker. We did make a few test prints and prototype parts so can confirm the machine is working properly. I did find the feed mechanism to be a bit fiddly so we purchased the new 'hot-end v2' upgrade but have not yet installed it so that will be included as well. In addition to the Ultimaker and the hot-end upgrade i have 1 spool of ABS plastic and 1 spool of PLA plastic (both 'natural' color) plus about 1/2 a spool of black PLA which i'll include to get you started.

    Buying all this new in the USA would cost roughly $1900 (1575 for the Ultimaker, $75 for the v2 Hot end upgrade, $75 for plastics plus $190 shipping from the Netherlands). And then you'd still have to put it all together, which was a pretty daunting task.

    Asking $950 for everything (ie. roughly half of what it would cost new) plus shipping or I'd meet you for personal delivery within 2 hr drive of Washington DC.

    Thanks,

    Steve

    http://www.shbobo.net

     

     

    For sale is a fully assembled Ultimaker, it was bought almost exactly a year ago and assembled by us for use in making prototype parts for an upcoming product. We've since decided on a wood CNC design and thus are selling the Ultimaker. We did make a few test prints and prototype parts so can confirm the machine is working properly. I did find the feed mechanism to be a bit fiddly so we purchased the new 'hot-end v2' upgrade but have not yet installed it so that will be included as well. In addition to the Ultimaker and the hot-end upgrade i have 1 spool of ABS plastic and 1 spool of PLA plastic (both 'natural' color) plus about 1/2 a spool of black PLA which i'll include to get you started.

    Buying all this new in the USA would cost roughly $1900 (1575 for the Ultimaker, $75 for the v2 Hot end upgrade, $75 for plastics plus $190 shipping from the Netherlands). And then you'd still have to put it all together, which was a pretty daunting task.

    Asking $950 for everything (ie. roughly half of what it would cost new) plus shipping or I'd meet you for personal delivery within 2 hr drive of Washington DC.

    Thanks,

    Steve

    http://www.shbobo.net

     

    plz email data and photos to dino@email.htnet.hr

    thx

    Dino

     

  • Share this post


    Link to post
    Share on other sites
    Posted · FS: Fully-Assembled Ultimaker in US

    plz email data and photos to dino@email.htnet.hr

    thx

    Dino

     

  • Share this post


    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Talking additive | The 3D printing podcast
        Why should we be the only ones asking questions? Join us and ask Jabil all your questions on September 22nd 5pm CET
          • Like
        • 3 replies
      • Ultimaker masterclass: Optimizing your Ultimaker Cura workflow
        Save your seat for either broadcast on September 23.
        What will you learn?
        · Best practices for iterative print preparation and every lesson you should learn from each print
        · The right way to use per-object settings and when they are most useful
        · Easy-to-use resources for anyone who wants to develop their own printer definitions, plugins, or print profiles
        · How to optimize print profile settings and whether to “keep” or “discard” changes
        · When is the right time to export your drawing from CAD? (Based on Ultimaker Cura’s surprising power as 3D control software)
        · And a whole lot more tips and tricks!
         
        How can I join?
        This free masterclass will take place twice:
        1. 11am CEST (5pm SGT, 5am EDT)
        2. 5pm CEST (11am EDT, 8am PDT, 11pm SGT)
          • Like
        • 0 replies
      • Do you use 3D printing at work? Let us know
        It doesn't matter if you are using 1 Ultimaker or 10, there is inspiration in everything. We're looking for ...
        • 1 reply
    ×
    ×
    • Create New...