Jump to content
Ultimaker Community of 3D Printing Experts

Design Challenge! UM3 Spool Holder Extension (Adapter)


Recommended Posts

Posted (edited) · Design Challenge! UM3 Spool Holder Extension (Adapter)

Got my UM3E -- discovered that a good amount of my filament spools will not fit when making use of dual extrusion.

Looking for some motivated designers to create an adapter between the filament guide and the reel holder to lengthen said item.

Looking for Ultimaker to share their ideas here and maybe some files/design specs to speed up the design process~

I'm not fast at all when designing (I take the methodical, incremental approach) so hoping for assistance here if no one else steps up~

Note:

While a longer reel holder could be another option, I'm looking for a cleaner option; like an adapter.

Reason for this is that this adapter can be further iterated upon to accommodate smaller spools like taulman nylon.

---

@nallath

@neotko

Who do I need to talk to in order to get access to the design files of the revised reel holder in the UM3?

I'm hoping to put together a sketch of what I'm attempting to accomplish here within a week or so (as life permits).

Edited by Guest
  • Like 1
Link to post
Share on other sites
  • 2 weeks later...
  • 4 weeks later...
Posted · Design Challenge! UM3 Spool Holder Extension (Adapter)

All the design files of the UM3 will be released in a few months. I don't think they'll give the files out earlier than that.

I've been wanting to re-design the spool holder since the first time I saw it. I have a few ideas. Question is if I'll be motivated enough to finally sit down and make something. Motivation for stuff like that has been lacking for me lately which sucks :( This post did spark a couple of ideas though...

  • Like 5
Link to post
Share on other sites
Posted · Design Challenge! UM3 Spool Holder Extension (Adapter)

I think when redesigning it there are 2 things to do;

1) have an adapter to raise the spool about 5 cm. the standard um3 has dropped the spool holder by about 5 cm which is enough to prevent the large spools to fit.. so that is no 1.

2)have an extension to have both the large spools as well as the small spools.

that being said;

i found this a real issue.. but now after a couple of months i don't see this as an issue anymore..

i just use the extended um3 that has the spool holder high enough for the larger spools i use. i have no interest to use a large spool together with a smaller spool... this would either mean a super hugo dual color print, as in 20+ days.. or it would be with PVA and the only real PLA i've found to be working perfectly with the PLA is ultimaker PLA which does not come in high spools..

so I don't think I'll actually be using the larger spool holder...

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Talking additive | The 3D printing podcast
        Why should we be the only ones asking questions? Join us and ask Jabil all your questions on September 22nd 5pm CET
          • Like
        • 3 replies
      • Ultimaker masterclass: Optimizing your Ultimaker Cura workflow
        Save your seat for either broadcast on September 23.
        What will you learn?
        · Best practices for iterative print preparation and every lesson you should learn from each print
        · The right way to use per-object settings and when they are most useful
        · Easy-to-use resources for anyone who wants to develop their own printer definitions, plugins, or print profiles
        · How to optimize print profile settings and whether to “keep” or “discard” changes
        · When is the right time to export your drawing from CAD? (Based on Ultimaker Cura’s surprising power as 3D control software)
        · And a whole lot more tips and tricks!
         
        How can I join?
        This free masterclass will take place twice:
        1. 11am CEST (5pm SGT, 5am EDT)
        2. 5pm CEST (11am EDT, 8am PDT, 11pm SGT)
          • Like
        • 0 replies
      • Do you use 3D printing at work? Let us know
        It doesn't matter if you are using 1 Ultimaker or 10, there is inspiration in everything. We're looking for ...
        • 1 reply
    ×
    ×
    • Create New...