Jump to content
Ultimaker Community of 3D Printing Experts

Changing Bed Temperature During Print 2+


Recommended Posts

Posted · Changing Bed Temperature During Print 2+

Hi

I understand the Ultimaker 2+ has the bed temperature set on the machine. Does this mean you can no longer change bed temperature during a print? I have just replaced my Original with a 2+. I have a stack of ABS that I want to use up. After many months of experimenting I found that I needed to start with a bed temperature of 110 to get a good stick onto Kapton but could reduce to 85 after the first few layers.

Regards

Ian

  • Link to post
    Share on other sites
    Posted · Changing Bed Temperature During Print 2+

    Yes for sure you can, but you need to inconveniently go through the menu's.

    Things are soooo much easier if you just use the @tinkergnome firmware.

    Your main settings always show directly in the display, and you can directly adjust from there.

    https://ultimaker.com/en/community/33324-changing-bed-temperature-during-print-2

    you can simply install the firmware using old (15.xx) cura

  • Link to post
    Share on other sites
    Posted · Changing Bed Temperature During Print 2+

    Yes, exact same gcode works as on UMO for controlling bed temp.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 6 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...