Jump to content
Ultimaker Community of 3D Printing Experts

Reduce Noise With Different Slicer


magicxman
 Share

Recommended Posts

Posted · Reduce Noise With Different Slicer

I noticed that when using different slicer to slice same parts, the printing 'music' or noise generated from the motor is different. Some slicers generated lesser noise. Does anyone encounter this? If so, let's poll which slicer generate least noise.

  • Link to post
    Share on other sites

    Posted · Reduce Noise With Different Slicer

    The noise is a product of the accelerations in the printhead. You are undoubtedly getting different sounds due to the different approaches each slicer takes in reading how to generate the g-code. As the largest impact in the way it generates the g-code is going to be what the part physically is, it would be particularly difficult to quantify which is the most quiet.

  • Link to post
    Share on other sites

    • 2 weeks later...
    Posted · Reduce Noise With Different Slicer

    If most of the noise is generated by acceleration of the printhead, NetFabb lets you manually set the maximum acceleration in the extended setup of the machine. Its default is 7 m/s2, so you can lower it and see if the noise goes down. Of course the build time will go up, depending on how many changes in direction and speed are needed.

    I have little experience with other slicers.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...