Jump to content
Ultimaker Community of 3D Printing Experts

ultimaker 3 connect to secure wifi network


Recommended Posts

Posted (edited) · ultimaker 3 connect to secure wifi network

can anybody tell me how to add the ultimaker 3 to an excisting wifi network?

the wifi setup gives a hotpoint, but i can't find that on my win7 network connectors

we did ask the vendor of the machine,but got no reply

Edited by Guest
  • Link to post
    Share on other sites
    Posted · ultimaker 3 connect to secure wifi network

    dear neotko

    i might been not clear, no this link is not the solution at all.

    with my windows 7 i don't get a pop-up and even if i ask to look for a new network, it will not give a connection.

    the question is, how to link the printer to the excisting network

  • Link to post
    Share on other sites
    Posted · ultimaker 3 connect to secure wifi network

    Hi, plug in your Ultimaker 3 to your router via an Ethernet cable. On the printer got to settings/network run down the selection and to "LAN cable". At the bottom of the screen you should see the internet address (eg 192.168.107) note this. Now go to a computer on your network and fire up a web browser and type the printer address you noted, in the address bar, which should bring up "Welcome to your Ultimaker 3"  page with a start a "Start WIFI setup" button on it.

  • Link to post
    Share on other sites
    Posted · ultimaker 3 connect to secure wifi network

    Can you try with your phone?

     

    thanks, but the idear on the network is to send files and to use the camera at the off-hourse printing,

    The mobile option does not add any fjnction as i see it now.

  • Link to post
    Share on other sites
    Posted · ultimaker 3 connect to secure wifi network

     

    Can you try with your phone?

     

    thanks, but the idear on the network is to send files and to use the camera at the off-hourse printing,

    The mobile option does not add any fjnction as i see it now.

     

    I just mean to finish the wifi setup

  • Link to post
    Share on other sites
    Posted · ultimaker 3 connect to secure wifi network

     

    Can you try with your phone?

     

    thanks, but the idear on the network is to send files and to use the camera at the off-hourse printing,

    The mobile option does not add any fjnction as i see it now.

     

    And unless you set up a VPN network (@UltiArjan did it) the monitoring only works when you are logged in on the same network as your Ultimaker 3 is connected to.
  • Link to post
    Share on other sites
    Posted · ultimaker 3 connect to secure wifi network

    And unless you set up a VPN network (@UltiArjan did it) the monitoring only works when you are logged in on the same network as your Ultimaker 3 is connected to.

     

    yeah, I was surprised how easy it is, depends on the type of router you have ofc. but with a "fritzbox" router it's a matter of a few minutes.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...